• easyE-line

     

    webshop 2017

Our small bestseller is now also available as easyE-35i with integrated controller, the intelligent inline actuator solution.The perfect addition without compromising on design and efficiency.

The integration of the controller results in the following advantages:

  • Very compact design despite integrated controller
  • Easy installation and maintenance free
  • Software for easy setup
  • Internal stroke limitation
  • Adjustable current limit
  • Internal heat protection
  • Industrial interface MODBUS RTU on RS485
  • Adjustable start ramp
  • Adjustable stop ramp
  • Plug & Play solution with iConnect-Box

The integrated control is offered in 6 versions.
All have one MODBUS-RTU system based on RS485:

  • SDB (Single Direction Basic)

    Simple control to move the actuator up and down. In combination with the iConnect-Box, it develops into a plug-and-play solution. Just plug in and run.
  • SDH (Single Direction Hall)

    Compared to the SDB controller, this controller also emits a Hall signal
  • SDP (Single Direction Position)

    This controller also outputs an analog position signal (0V-5V or 0V-10V).
  • SPP (Single Position Position)

    With this controller, a specific position can be controlled via an analog voltage signal.
  • SBS (Single Bus Status)

    This controller is operated completely via Modbus-RTU RS485
  • MDO (Multiple Direction Override)

    With this controller, up to 8 actuators can easily be operated synchronously

Configuration-Tool:

You can download the software for programming the integrated controller here

Features:

  • Stroke: 50, 100, 150, 200, 250, 300, 350, 400, 500 and 750mm (others on request)
  • Materials:
    Motor and actuator tube are powder coated steel or stainless steel
    Piston rod is aluminum
  • Protection class: IP66 (standard), harsh environment (according IP68 and IP69)
  • Temperature:
    Operation: -20ºC to +70ºC
    Storage: -40ºC to +70ºC
  • Cable: Cores: 2 x AWG16 + 6 x AWG 26, Ø = 6,8 mm, black jacket, Molex Mini-Fit Jr. 8 pin or similar
  • Bending radius: 6x cable diameter
  • Max. static load/Self locking force: 5400N, depending on stroke length for push-applications
  • Duty cycle: Max. 10% or 2 minutes in use followed by 18 minutes rest

Speed and forces

24VDC (max 28VDC) - Current at maximum load: 1,8A

 Gear ratio C D E F G H
 Force (dyn. push and pull) [N] 120 400 600 900 1600 2200
 Speed at maximum load [mm/s] 33 16 12 7,5 4 3
Max. load limited for stroke length >400mm: 1000N  

12VDC (max 14VDC) - Current at maximum load: 3,6A

 Gear ratio C D E F G H
 Force (dyn. push and pull) [N]       400 600 900 1500 2000
 Speed at maximum load [mm/s]   16 9 7,5 3,5 2,5
Max. load limited for stroke length >400mm: 1000N  

Speed/Force (24VDC)

easyE Speed Force 35 24V

Force/Current (24VDC)

easyE Force Current 35 24V

Speed/Force (12VDC)

easyE Speed Force 35 12V

Force/Current (12VDC)

easyE Force Current 35 12V

Dimensions

easyE Einbaulaenge 35 e

  EL UL/EN60.601 harsh environment
 Gear ratio: C, D, E, F Stoke + 170* +10 +11
 Gear ratio: G, H Stoke + 180*

* Stroke length >400mm: EL+7mm, stroke length >700mm: EL +42mm
Axial backlash: +/- 0,5mm, generally length tolerance +/- 1mm

Weight of the actuators:

 Stroke length [mm]
50 100 150 200 250 300 350 400 500 750
 Weight [kg] 0,8 0,9 1,0 1,1 1,2 1,3 1,4 1,6 1,8 2,3

Actual weight may vary depending on model and options selected.

Connecting parts "Motor-Side":

Hinge eye

Hinge eye
Aluminium
  • Code: A1M
  • Maximum static load: 5400N

Stainless steel (316)
  • Code: C1M
  • Maximum static load: 5400N

Connecting part "Piston-rod-Side":

Hinge eye

Hinge eye
Aluminium
  • Code: A1K
  • Maximum static load: 5400N

Stainless steel (316)
  • Code: C1K
  • Maximum static load: 5400N

Recommended Mounting Methods

  • Do not clamp actuators on tubing
  • Always keep both brackets mounted in the same orientation and ensure to flush mount actuator
  • Brackets must always be able to rotate on axels in mountings

For the fixation of the easyE-line actuators we offer the following brackets:

EEL900BA35-2KS

EEL900BA35-2KS

Piston rod side
Max. load: 2200N
Order-No.: EEL900BA35-2KS
Get the CAD-File here
EEL900BA35-2MS

EEL900BA35-2MS

Motor side
Max. load: 2200N
Order-No.: EEL900BA35-2MS
Get the CAD-File here

easyE Montage

Please note

  • Power supply without over-current protection can cause serious damage to the actuator at mechanical end-stop or when actuator is overloaded in another way
  • Radial forces might have an adverse affect on the performance or lead to damage of the actuator
  • Keep piston tube clean
  • Longer cable lengths may cause voltage drop which affects the performance of the actuator
    Max total cable length on 12VDC: 5 meters
  • The dust and water sealing of "harsh environment" actuators might affect their performance
  • All specifications are for 25 ºC ambient – low temperature might affect performance
  • Depending on load and application, nominal and actual stroke length may differ due to internal disc springs not being fully compressed
Cookies make it easier for us to provide you with our services. With the usage of our services you permit us to use cookies.