7 – 12 000 N
Force
10 – 1 000 MM
Stroke
3/8 – 30/70
Diameter
CAD Product Configurator
Select your product below and easily configure your CAD data in the desired format.
Gas Springs
Controlled pressing, lifting or lowering without external energy! We manufacture gas springs of any size and any extension force according to your requirements and exactly for your needs.
Lockable Gas Springs
Whenever considerable forces act on moving structural parts, reliable lockability takes on great importance. By actuating the release pin, the Bansbach gas spring can be securely locked in any desired position of the stroke.
Gas Traction Spring
easylift gas traction springs are also available with your desired retraction force and with all features, such as end damping or overall length, precisely matched to your application. Due to the constant production of intermediate sizes and the extensive stock of components and parts, almost all production requests can be fulfilled at short notice, i.e. within a few days or weeks.
easyE®-Line
With the easyE-line you get an in-line actuator in a particularly slim design. The linear arrangement of motor, gearhead and spindle results in a very slim format for installation. With outer diameters of 35, 50 and 60mm, the actuator fits into almost any application. And it does so with forces of up to 10,000N (easyE-60).
What the actuator has to do is controlled by the matching controller. Whether plug-and-play or integration into your PLC, synchronous adjustment of several cylinders or mobile battery operation – you will also find all this in the easyE-line program.
Lockable Gas Springs
Controlled pressing, lifting and positioning up to absolutely rigid blocking on both sides!
0 – 2 600 N
Force
10 – 800 MM
Stroke
8/19 – 14/40
Diameter
Stainless Steel Gas Springs
Bansbach easylift manufactures stainless steel gas springs exclusively from high-quality stainless steel material (1.4404, V4A, AISI No. 316L). This means that they are not only water-resistant, but can also be used in the food, chemical and seawater sectors. Please note the Niro class of the available connection parts.
7 – 12 000 N
Force
10 – 1 000 MM
Stroke
8/19 – 14/40
Diameter
Gas Traction Springs
Controlled pulling or positioning, also damped if desired – according to your requirements!
30 – 4 000 N
Force
10 – 600 MM
Stroke
6/19 – 14/40
Diameter
In-Line Actuator
In-line actuators with integrated control!
120 – 10 000 N
Maximum load
50 – 750 MM
Stroke
3 – 70 MM/S
Speed
With our “Technical Support” you have a direct line to our technicians, who will competently assist you. If you have questions about offers, availability or prices, our commercial support will be happy to assist you.
