At Bansbach easylift
the product is precisely adapted to your requirements in order to ensure optimal function. We are happy to support and advise you in the selection of the right product.
With our “Technical Support” you have a direct line to our technicians, who will competently assist you. If you have any questions about offers, availability or prices, our commercial support will be happy to assist you.
Hydraulic-Pumps
Height adjustment by hydraulic pump –
a clever alternative not only for beds
With the new Bansbach hydraulic pump, the height of a great variety of applications can be adjusted by simply pumping. The pump can be
completely operated without external energy supply. The movement is effected by simply pumping. Due to the weight of the application, the reset is always controlled and can be effected by opening the valve with a movement at the lever.
Description
A clever alternative not only for beds!
With the new Bansbach hydraulic pump, the height of a great variety of applications can be adjusted by simply pumping. The pump can be completely operated without external energy supply. The movement is effected by simply pumping. Due to the weight of the application, the reset is always controlled and can be effected by opening the valve with a movement at the lever.
We offer here also a very flexible product range which will be adapted to the characteristics of your application and therefore optimally fulfills your requirements. Please contact us!
Model
- 1
- 2
- 3
- 4
Connecting part
housing
housing
- = none
- A*
- B*
- X = Special
Connecting part
pedal shaft
pedal shaft
- A = No hole
- B = Hole
- X = Special
Connecting part
piston rod
piston rod
- A
- B
- C
- X = Special
Stroke
- 80 – 400
Extension
length
(min)
length
(min)
- 1= stroke + 110
- 2= stroke + 110
- 3= stroke + 110
- 4= stroke + 136
Color
- S = black
- G = grey
- W = white
- U = uncoated
- X = special
Specification
- = Standard
- B = Special
*If you choose “Connecting part housing” A or B: Extension length (min)=stroke + 172 mm
Products characteristics:
- Maintenance-free
- Completely independent of external energy supply
- Extension forces up to 10 kN
- Strokes from 80 – 400 mm possible
- Different connecting parts available, special connecting parts on request
- Operating temperature: + 10°C – + 40°C
- Lowering speed customised
- Overload protection at the end of the stroke (extended)
- On request overload protection in every stroke position and individually defined maximum force
Pump
General
Model
- 1
- 2
- 3
- 4
Ø
Piston rod
[mm]
Piston rod
[mm]
- 20
- 16
- 14
- 22
Stroke force
[N]
[N]
- 10000
- 6400
- 4900
- 12500
Number of strokes
[per 100mm]
[per 100mm]
- 11 +-1
- 7 +-1
- 6 +-1
- 14 +-1
Moment
[Nm/max Last]
[Nm/max Last]
- 140
- 140
- 140
- 140
Angle to release
[°]
[°]
- 10
- 10
- 10
- 10
The mentioned torques are the maximum torques which are necessary for operation.
Customized modifications for pump strokes and speeds for downward movements are available on request.
Connecting parts piston rod:
A
- Model1
- Model2
- Model3
- Model4
ØD1 [mm]
- 20
- 16
- 14
- 22
d1 [mm]
- 12,1
- 10,1
- 8,1
- 12,1
B
- Model1
- Model2
- Model3
- Model4
ØD1 [mm]
- 20
- 16
- 14
- 22
M1 [mm]
- M14x1,5
- M14x1,5
- M10
- M14x1,5
d1 [mm]
- 20
- 20
- 15
- 20
C
- Model1
- Model2
- Model3
- Model4
ØD1 [mm]
- 20
- 16
- 14
- 22
M1 [mm]
- M8
- M8
- M8
- M8
d1 [mm]
- 20
- 20
- 20
- 20
Lever:
Order-Number: HP-PH290
Do you need help?
We are there for you
Contact personApplications examples
Here you will find our products.
FAQs
Are Bansbach gas springs ROHS compliant?
Yes, they are fully ROHS compliant and also meet all guidelines, export/import regulations and goals of other company programs that we are aware of.
Can a gas spring made to customer specifications be returned?
Bansbach gas springs are manufactured to order – from mostly stock components. Cancellation, exchange or return is therefore not possible.
In case of free delivery, we will gladly take over the disposal – without charge – for you.
Can gas springs be disposed of in household waste?
No, gas springs are mainly made of metal. Please observe our disposal instructions.
Can gas springs be used in the food industry?
With the high-quality stainless steel gas springs in V4A, the high requirements of the food industry are met. Food-grade oil (FDA oil) is optionally available.
Can the speed/damping of the gas spring be influenced?
By selecting the appropriate nozzle bore and oil viscosity, the speed and damping of the gas spring can be adapted to the application.
Do Bansbach gas springs have to be stored with the piston rod pointing downwards?
Bansbach gas springs can be stored in any position.
Does a gas spring need to be protected from dirt?
The piston rod must be protected against impact, scratches and contamination – especially paint application. Damage to the surface will destroy the sealing system. If necessary, a wiper or a protective tube should be provided.
Does a gas spring need to be serviced?
No, Bansbach gas springs are maintenance-free. The piston rod must not be greased or oiled.
How do I find my personal contact person?
Bansbach easylift GmbH
Bararossastrasse 8
D-73547 Lorch
Phone: +49 (0) 7172/9107-0
Fax: +49 (0) 7172/9107-44
E-Mail: info@bansbach.de
You can find a contact person on site
Contact form
How high can the internal pressure of a gas spring be?
Depending on the series and the desired extension force, this can be up to approx. 300 bar.
How much is the weight of a gas spring?
Due to the wide range of products, the weights vary greatly.
Diameter piston rod / cylinder:
Ø3/8; Ø4/12; Ø6/15; Ø6/19; Ø6/22; Ø8/19; Ø8/22
Weight
100 g – 500 g
———-
Diameter piston rod / cylinder:
Ø8/28; Ø10/22; Ø10/28; Ø12/28; Ø14/28
Weight
200 g – 1000 g
———-
Diameter piston rod / cylinder:
Ø16/28; Ø10/40; Ø12/40; Ø14/40; Ø20/40; Ø30/70
Weight
500 g – 8000 g
In which colors are Bansbach gas springs available?
The piston rod and the cylinder are supplied in black (standard).
On request, our cylinders are available in all RAL colors. Exception: stainless steel
In which temperature ranges can Bansbach gas springs be used?
For ambient temperatures from -30°C to +80°C.
For other temperature ranges (down to -55°C or up to +200°C) special seal sets are available.
Is it possible to repair a gas spring?
No, because it is a closed system that is under high pressure and must not be opened.
Is the extension force of the gas spring temperature-dependent?
For physical reasons, the extension force of the gas spring changes by approx. 3.3% per 10°C (base + 20°C).
What does the index number (e.g. – -001/100 N) at the end of the article designation of the gas spring mean?
This is a code assigned internally by Bansbach for unambiguous reproducibility of the gas spring.
What materials are Bansbach gas springs made of?
Gas springs consist of piston rod, cylinder tube, connecting parts, turned parts, seals, oil, grease and nitrogen. Piston rods and cylinder tubes are made of steel and are CeramPro® or powder coated in our company. Connecting parts and turned parts are made of lead-free steel or lead-free aluminum.
Seals, oils, greases do not contain substances that are on the list of critical or hazardous substances. Nitrogen is an inert gas that neither burns nor poses any other health hazards. Bansbach gas springs therefore comply with current and, as far as we know, planned laws and regulations.
They comply for example with the RoHS Directive, WEEE Directive, Directives 2003/11/EC, 2002/95/EC, 2002/96/EC. They are not covered by Directives 94/9/EC, 97/23/EC, and 98/37/EC, nor by UN 3164, TRGS 220, and UL 60601-1.
Verification that Bansbach gas springs in the end product comply with national or international laws and regulations remains the responsibility of our customers or the user.
What service life/running performance can I expect from a Bansbach gas spring?
On average, Bansbach gas springs are designed for 50,000 – 100,000 double strokes.
Depending on the design, installation and effective stroke, several 100,000 strokes can also be achieved.
For other products please contact us.
Which stroke lengths are possible for the gas springs?
Depending on the series and design of the gas spring, the stroke length can be freely selected between 10 mm and 1000 mm. Other variations possible, please contact us.
With our “Technical Support” you have a direct line to our technicians, who will competently assist you. If you have questions about offers, availability or prices, our commercial support will be happy to assist you.