At Bansbach easylift
the product is precisely adapted to your requirements in order to ensure optimal function. We are happy to support and advise you in the selection of the right product.
With our “Technical Support” you have a direct line to our technicians, who will competently assist you. If you have any questions about offers, availability or prices, our commercial support will be happy to assist you.
Adjustable MC-dampers
Adjustable Damper
If different or not clearly defined damping intensities are required, we recommend the use of adjustable easylift MC-dampers. The damping speed can be ad justed when the damper is mounted.
Details
Possible article no.:
V1 A1 P B 3 200 665 001* 550N
Connecting parts
piston rod
piston rod
V1
- V1
Connecting parts
cylinder
cylinder
A1
- See connecting parts
Model
P**
- B
- K
- P
- X
Damping
B
- B = both directions
- A = push-out direction
- E = push-in direction
- B = both directions
- A = push-out direction
- E = push-in direction
- B = both directions
- A = push-out direction
- E = push-in direction
- B = both directions
- A = push-out direction
- E = push-in direction
Size
Øx/Øy (mm)
3
- 2= 10/22
- 3= 10/28
- 2= 10/22
- 3= 10/28
- 2= 10/22
- 3= 10/28
- 2= 10/22
- 3= 10/28
Stroke
mm
200
- 10-500
- 10-500
- 30-300
- 10-250
Extended length
min. EL2 (mm)
665
- Stroke x 2 +129
- Stroke x 2 +133
- Stroke x 2,88 +116
- Stroke x 2,64 +116
- Stroke x 2,32 +116
- Stroke x 2,55 +123
- Stroke x 2,39 +123
- Stroke x 2,20 +123
- Stroke x 3,46 +126
- Stroke x 3,15 +126
- Stroke x 2,76 +126
- Stroke x 2,81 +130
- Stroke x 2,63 +130
- Stroke x 2,42 +130
- Stroke x 3,00 +128
- Stroke x 3,00 +132
Progressivity
approx. %
- 35
- 50
- 100
- 35
- 50
- 100
Index Number
001*
- see below
Extension
F (N)
550N
- –
- 50-1300
- 50-1300
- –
Damping force in pull direction
- 30-5000
- 30-5000
- 30N until 2,6*F1
- 30N until 4,8*F1
- 30-5000
Damping force in push direction
- 30-5000
- 30N until 3,6*F1
- 30N until 3,6*F1
- 30-5000
- 30-5000
Index No.
With the index no. – only necessary for repeating orders – we can reproduce exactly the same gas spring which has already been produced. You will receive the index no. with the order confirmation / invvoice.
**
B = with free travel, nearly completely filled with oil, no extension force
K= minimum extension force 50N, no free travel – locking force in push direction be exceeded
P= minimum extension force 50N, no free travel – locking force in pull direction be exceeded
X= no free travel and extension force
Brackets
Bansbach Brackets
Here you will find your brackets.
900BA1SB
900BA2SB
900BA5SB
900BA3
900BA4
900BA6BO
900BA12SR
900BA14SR
900BA20SR
900BA21SR
Connecting parts
Bansbach connecting parts
Choose an connecting part.
Code
A1
A1
B1
C1
D1
D2
E1
E2
F2
F2
G2
H1
H2
J2
K2
K3
L2
M2
M2
M3
N2
N3
O2
P2
V2
Z1
Z2
SW
10,0
10,0
12,0
14,0
3,0
5,0
3,0
5,0
10,0
10,0
8,0
3,0
10,0
8,20
12,0
12,0
12,0
10,0
10,0
8,0
10,0
8,0
10,0
5,0
6,0
10,0
12,0
Ø
8,2
8,2
8,2
14,2
6,2
6,2
8,2
8,2
8,2
8,2
6,2
4,1
6,2
8,2
8,2
9,2
10,2
10,2
10,2
10,2
8,2
8,2
10,5
8,2
8,2
8,5
12,2
L2
16,0
16,0
13,0
40,0
12,0
16,0
12,0
16,0
9,5
12,0
16,0
8,0
16,0
16,0
16,0
16,0
13,0
16,0
16,0
16,0
13,0
16,0
16,0
12,0
13,0
16,0
12,0
L4
15,0
15,0
12,0
20,0
10,5
15,0
10,5
15,0
9,5
11,0
15,0
7,0
15,0
15,0
15,0
15,0
12,0
15,0
15,0
15,0
12,0
15,0
15,0
11,0
12,0
15,0
12,0
Ø1
15,0-17,0
20,0
20,0
20,0
11,0
15,0-17,0
11,0
15,0-17,0
15,0
17,0
15,0-17,0
8,0
15,0-17,0
15,0-17,0
17,0
20,0
20,0
15,0-17,0
20,0
16,0
20,0
20,0
20,0
17,0
20,0
20,0
20,0
d2
19,0-22,0
28,0
28,0
20,0
15,0
19,0-22,0
15,0
19,0-22,0
19,0
22,0
19,0-22,0
12,0
19,0-22,0
19,0-22,0
22,0
28,0
28,0
19,0-22,0
28,0
28,0
28,0
28,0
28,0
22,0
28,0
28,0
28,0
Material
Aluminium
Aluminium
Aluminium
Aluminium
Aluminium
Aluminium
Steel
Aluminium
Aluminium
Aluminium
Aluminium
Steel
Aluminium
Aluminium
Aluminium
Aluminium
Aluminium
Aluminium
Aluminium
Aluminium
Aluminium
Aluminium
Aluminium
Aluminium
Aluminium
Aluminium
Downloads
Do you need help?
We are there for you
Contact person
Step by step to the individual product
We build your gas spring!
The Bansbach gas spring configurator offers
you the possibility to put together your individual
gas spring from various components
even more easily and quickly.
Bansbach easylift
Stainless steel – Products
- » High-quality stainless steel material (V4A, AISI No. 316L)
- » Water resistant
- » Suitable for food, chemical and seawater applications
- » Connecting parts also made of stainless steel
Applications examples
Here you will find our products.
FAQs
Are Bansbach gas springs ROHS compliant?
Yes, they are fully ROHS compliant and also meet all guidelines, export/import regulations and goals of other company programs that we are aware of.
Can a gas spring made to customer specifications be returned?
Bansbach gas springs are manufactured to order – from mostly stock components. Cancellation, exchange or return is therefore not possible.
In case of free delivery, we will gladly take over the disposal – without charge – for you.
Can gas springs be disposed of in household waste?
No, gas springs are mainly made of metal. Please observe our disposal instructions.
Can gas springs be used in the food industry?
With the high-quality stainless steel gas springs in V4A, the high requirements of the food industry are met. Food-grade oil (FDA oil) is optionally available.
Can the speed/damping of the gas spring be influenced?
By selecting the appropriate nozzle bore and oil viscosity, the speed and damping of the gas spring can be adapted to the application.
Do Bansbach gas springs have to be stored with the piston rod pointing downwards?
Bansbach gas springs can be stored in any position.
Does a gas spring need to be protected from dirt?
The piston rod must be protected against impact, scratches and contamination – especially paint application. Damage to the surface will destroy the sealing system. If necessary, a wiper or a protective tube should be provided.
Does a gas spring need to be serviced?
No, Bansbach gas springs are maintenance-free. The piston rod must not be greased or oiled.
How do I find my personal contact person?
Bansbach easylift GmbH
Bararossastrasse 8
D-73547 Lorch
Phone: +49 (0) 7172/9107-0
Fax: +49 (0) 7172/9107-44
E-Mail: info@bansbach.de
You can find a contact person on site
Contact form
How high can the internal pressure of a gas spring be?
Depending on the series and the desired extension force, this can be up to approx. 300 bar.
How much is the weight of a gas spring?
Due to the wide range of products, the weights vary greatly.
Diameter piston rod / cylinder:
Ø3/8; Ø4/12; Ø6/15; Ø6/19; Ø6/22; Ø8/19; Ø8/22
Weight
100 g – 500 g
———-
Diameter piston rod / cylinder:
Ø8/28; Ø10/22; Ø10/28; Ø12/28; Ø14/28
Weight
200 g – 1000 g
———-
Diameter piston rod / cylinder:
Ø16/28; Ø10/40; Ø12/40; Ø14/40; Ø20/40; Ø30/70
Weight
500 g – 8000 g
In which colors are Bansbach gas springs available?
The piston rod and the cylinder are supplied in black (standard).
On request, our cylinders are available in all RAL colors. Exception: stainless steel
In which temperature ranges can Bansbach gas springs be used?
For ambient temperatures from -30°C to +80°C.
For other temperature ranges (down to -55°C or up to +200°C) special seal sets are available.
Is it possible to repair a gas spring?
No, because it is a closed system that is under high pressure and must not be opened.
Is the extension force of the gas spring temperature-dependent?
For physical reasons, the extension force of the gas spring changes by approx. 3.3% per 10°C (base + 20°C).
What does the index number (e.g. – -001/100 N) at the end of the article designation of the gas spring mean?
This is a code assigned internally by Bansbach for unambiguous reproducibility of the gas spring.
What materials are Bansbach gas springs made of?
Gas springs consist of piston rod, cylinder tube, connecting parts, turned parts, seals, oil, grease and nitrogen. Piston rods and cylinder tubes are made of steel and are CeramPro® or powder coated in our company. Connecting parts and turned parts are made of lead-free steel or lead-free aluminum.
Seals, oils, greases do not contain substances that are on the list of critical or hazardous substances. Nitrogen is an inert gas that neither burns nor poses any other health hazards. Bansbach gas springs therefore comply with current and, as far as we know, planned laws and regulations.
They comply for example with the RoHS Directive, WEEE Directive, Directives 2003/11/EC, 2002/95/EC, 2002/96/EC. They are not covered by Directives 94/9/EC, 97/23/EC, and 98/37/EC, nor by UN 3164, TRGS 220, and UL 60601-1.
Verification that Bansbach gas springs in the end product comply with national or international laws and regulations remains the responsibility of our customers or the user.
What service life/running performance can I expect from a Bansbach gas spring?
On average, Bansbach gas springs are designed for 50,000 – 100,000 double strokes.
Depending on the design, installation and effective stroke, several 100,000 strokes can also be achieved.
For other products please contact us.
Which stroke lengths are possible for the gas springs?
Depending on the series and design of the gas spring, the stroke length can be freely selected between 10 mm and 1000 mm. Other variations possible, please contact us.
With our “Technical Support” you have a direct line to our technicians, who will competently assist you. If you have questions about offers, availability or prices, our commercial support will be happy to assist you.