Hydraulikpumpe TEST
Durch einfaches Pumpen die Höhe verstellen
Mittels der neuen Bansbach Hydraulik-Pumpe lässt sich eine Vielzahl an Applikationen durch einfaches Pumpen in der Höhe verstellen. Einen besonderen Vorteil bietet dabei die Netzunabhängigkeit. Die Bewegung erfolgt durch einfaches Pumpen. Die Rückstellung erfolgt durch das Gewicht der Anwendung immer kontrolliert, indem das Ventil mittels einer Bewegung am Hebel geöffnet wird.
Nicht nur für Betten eine clevere Lösung
Die Bansbach-Hydraulik-Pumpe passt sich den Anforderungen Ihrer Anwendung an und erfüllt damit optimal die geforderten Eigenschaften. Sprechen Sie mit uns!
Bauart
- u003cliu003e1u003c/liu003eu003cliu003e2u003c/liu003eu003cliu003e3u003c/liu003e
Anschlussu003cbru003eGehäuse
- u003cliu003e= ohneu003c/liu003eu003cliu003eA*u003c/liu003eu003cliu003eB*u003c/liu003eu003cliu003eX = Sonderu003c/liu003e
Anschlussu003cbru003eBetätigungswelle
- u003cliu003eA = ohne Bohrungu003c/liu003eu003cliu003eB = mit Bohrungu003c/liu003eu003cliu003eX = Sonderu003c/liu003e
Anschlussu003cbru003eKolbenstange
- u003cliu003eAu003c/liu003eu003cliu003eBu003c/liu003eu003cliu003eCu003c/liu003eu003cliu003eX = Sonderu003c/liu003e
Hub
- u003cliu003e80 – 400u003c/liu003e
Einbaulängeu003cbru003e(min)
- u003cliu003eHub + 110*u003c/liu003e
Farbe
- u003cliu003eS = Schwarzu003c/liu003eu003cliu003eG = Grauu003c/liu003eu003cliu003eW = Weissu003c/liu003eu003cliu003eU = Unlackiertu003c/liu003eu003cliu003eX = Sonderu003c/liu003e
Spezifikation
- u003cliu003e= Standardu003c/liu003eu003cliu003eB = Sonderu003c/liu003e
Prdoukteigenschaften:
- wartungsfrei und vollkommen netzunabhängig
- Ausschubkraft bis 10 kN
- Hub von 80 – 400 mm frei wählbar
- verschiedene Befestigungsanschlüsse wählbar
- Betriebstemperatur: +10°C – +40°C
- Absenkgeschwindigkeit kundenspezifisch
- Überlastschutz
Allgemein
Bauart
- u003cliu003e1u003c/liu003eu003cliu003e2u003c/liu003eu003cliu003e3u003c/liu003e
Ø Kolbenstangeu003cbru003e[mm]
- u003cliu003e20u003c/liu003eu003cliu003e16u003c/liu003eu003cliu003e14u003c/liu003e
Hubkraft [N]
- u003cliu003e10000u003c/liu003eu003cliu003e6400u003c/liu003eu003cliu003e4900u003c/liu003e
Pumphübeu003cbru003e[pro 100mm]
- u003cliu003e11 +-1u003c/liu003eu003cliu003e7 +-1u003c/liu003eu003cliu003e6 +-1u003c/liu003e
erforderliches Momentu003cbru003e[Nm/max Last]
- u003cliu003e140u003c/liu003eu003cliu003e140u003c/liu003eu003cliu003e140u003c/liu003e
Auslösewinkelu003cbru003e[°]
- u003cliu003e10u003c/liu003eu003cliu003e10u003c/liu003eu003cliu003e10u003c/liu003e
Die angegebenen Momente sind die zur Bedienung erforderlichen Maximalmomente.
Kundenspezifische Anpassungen in den Bereichen Pumphübe und Ablassgeschwindigkeiten auf Anfrage.
Maße Anschlussteile Kolbenstange
A
- u003cliu003eBauart1u003c/liu003eu003cliu003eBauart2u003c/liu003eu003cliu003eBauart3u003c/liu003e
ØD1 [mm]
- u003cliu003e19u003c/liu003eu003cliu003e15u003c/liu003eu003cliu003e13u003c/liu003e
d1 [mm]
- u003cliu003e12,1u003c/liu003eu003cliu003e10,1u003c/liu003eu003cliu003e8,1u003c/liu003e
B
- u003cliu003eBauart1u003c/liu003eu003cliu003eBauart2u003c/liu003eu003cliu003eBauart3u003c/liu003e
ØD1 [mm]
- u003cliu003e20u003c/liu003eu003cliu003e16u003c/liu003eu003cliu003e14u003c/liu003e
M1 [mm]
- u003cliu003eM14x1,5u003c/liu003eu003cliu003eM14x1,5u003c/liu003eu003cliu003eM10u003c/liu003e
d1 [mm]
- u003cliu003e20u003c/liu003eu003cliu003e20u003c/liu003eu003cliu003e15u003c/liu003e
C
- u003cliu003eBauart1u003c/liu003eu003cliu003eBauart2u003c/liu003eu003cliu003eBauart3u003c/liu003e
ØD1 [mm]
- u003cliu003e20u003c/liu003eu003cliu003e16u003c/liu003eu003cliu003e14u003c/liu003e
M1 [mm]
- u003cliu003eM8u003c/liu003eu003cliu003eM8u003c/liu003eu003cliu003eM8u003c/liu003e
d1 [mm]
- u003cliu003e20u003c/liu003eu003cliu003e20u003c/liu003eu003cliu003e20u003c/liu003e
Hebel
Artikel-Nr. HP-PH290
Noch Fragen zu unseren Gasfedern, Dämpfern etc.?
Wir sind für Sie da!
Zum AnsprechpartnerBei Bansbach easylift
wird das Produkt genau an Ihre Anforderungen angepasst, um eine optimale Funktion zu gewährleisten. Gerne unterstützen und beraten wir Sie bei der Auswahl des richtigen Produkts, von der einfachen Gasdruckfeder bis zur Sonder-Pneumatik.
Mit unserem “Technical Support” haben Sie den direkten Draht zu unseren Technikern, die Ihnen kompetent zur Seite stehen. Sollten Sie Fragen zu Angeboten, Verfügbarkeiten oder Preisen haben, unterstützt Sie gerne unser kaufmännischer Support.
Anwendungsbeispiele
Hier finden sich unsere Produkte wieder.
FAQs
Häufig gestellte Fragen.
Are Bansbach gas springs ROHS compliant?
Yes, they are fully ROHS compliant and also meet all guidelines, export/import regulations and goals of other company programs that we are aware of.
Can a gas spring made to customer specifications be returned?
Bansbach gas springs are manufactured to order – from mostly stock components. Cancellation, exchange or return is therefore not possible.
In case of free delivery, we will gladly take over the disposal – without charge – for you.
Can gas springs be disposed of in household waste?
No, gas springs are mainly made of metal. Please observe our disposal instructions.
Can gas springs be used in the food industry?
With the high-quality stainless steel gas springs in V4A, the high requirements of the food industry are met. Food-grade oil (FDA oil) is optionally available.
Can the speed/damping of the gas spring be influenced?
By selecting the appropriate nozzle bore and oil viscosity, the speed and damping of the gas spring can be adapted to the application.
Do Bansbach gas springs have to be stored with the piston rod pointing downwards?
Bansbach gas springs can be stored in any position.
Does a gas spring need to be protected from dirt?
The piston rod must be protected against impact, scratches and contamination – especially paint application. Damage to the surface will destroy the sealing system. If necessary, a wiper or a protective tube should be provided.
Does a gas spring need to be serviced?
No, Bansbach gas springs are maintenance-free. The piston rod must not be greased or oiled.
How do I find my personal contact person?
Bansbach easylift GmbH
Bararossastrasse 8
D-73547 Lorch
Phone: +49 (0) 7172/9107-0
Fax: +49 (0) 7172/9107-44
E-Mail: info@bansbach.de
You can find a contact person on site
Contact form
How high can the internal pressure of a gas spring be?
Depending on the series and the desired extension force, this can be up to approx. 300 bar.
How much is the weight of a gas spring?
Due to the wide range of products, the weights vary greatly.
Diameter piston rod / cylinder:
Ø3/8; Ø4/12; Ø6/15; Ø6/19; Ø6/22; Ø8/19; Ø8/22
Weight
100 g – 500 g
———-
Diameter piston rod / cylinder:
Ø8/28; Ø10/22; Ø10/28; Ø12/28; Ø14/28
Weight
200 g – 1000 g
———-
Diameter piston rod / cylinder:
Ø16/28; Ø10/40; Ø12/40; Ø14/40; Ø20/40; Ø30/70
Weight
500 g – 8000 g
In which colors are Bansbach gas springs available?
The piston rod and the cylinder are supplied in black (standard).
On request, our cylinders are available in all RAL colors. Exception: stainless steel
In which temperature ranges can Bansbach gas springs be used?
For ambient temperatures from -30°C to +80°C.
For other temperature ranges (down to -55°C or up to +200°C) special seal sets are available.
Is it possible to repair a gas spring?
No, because it is a closed system that is under high pressure and must not be opened.
Is the extension force of the gas spring temperature-dependent?
For physical reasons, the extension force of the gas spring changes by approx. 3.3% per 10°C (base + 20°C).
What does the index number (e.g. – -001/100 N) at the end of the article designation of the gas spring mean?
This is a code assigned internally by Bansbach for unambiguous reproducibility of the gas spring.
What materials are Bansbach gas springs made of?
Gas springs consist of piston rod, cylinder tube, connecting parts, turned parts, seals, oil, grease and nitrogen. Piston rods and cylinder tubes are made of steel and are CeramPro® or powder coated in our company. Connecting parts and turned parts are made of lead-free steel or lead-free aluminum.
Seals, oils, greases do not contain substances that are on the list of critical or hazardous substances. Nitrogen is an inert gas that neither burns nor poses any other health hazards. Bansbach gas springs therefore comply with current and, as far as we know, planned laws and regulations.
They comply for example with the RoHS Directive, WEEE Directive, Directives 2003/11/EC, 2002/95/EC, 2002/96/EC. They are not covered by Directives 94/9/EC, 97/23/EC, and 98/37/EC, nor by UN 3164, TRGS 220, and UL 60601-1.
Verification that Bansbach gas springs in the end product comply with national or international laws and regulations remains the responsibility of our customers or the user.
What service life/running performance can I expect from a Bansbach gas spring?
On average, Bansbach gas springs are designed for 50,000 – 100,000 double strokes.
Depending on the design, installation and effective stroke, several 100,000 strokes can also be achieved.
For other products please contact us.
Which stroke lengths are possible for the gas springs?
Depending on the series and design of the gas spring, the stroke length can be freely selected between 10 mm and 1000 mm. Other variations possible, please contact us.
Mit unserem “Technischen Support” haben Sie einen direkten Draht zu unseren Technikern, die Ihnen gerne und kompetent weiterhelfen. Bei Fragen zu Angeboten, Verfügbarkeit oder Preisen hilft Ihnen unser Verkaufssupport gerne weiter.