EEL-S1
The S1 controller offers a simple plug & play solution for our actuators for individual, parallel and synchronous operation. The controllers are pre-configurated and adapted to the respective actuator.
So in order to start operation, the actuator only has to be connected with the controller. It is possible to control up to 3 actuators in parallel. Besides that, the controller offers the possibility to connect external sensors such as a remote control or anti-squeeze protection bar. A cascading of up to 4 S1 controllers is possible, too.
The controllers are available with 120V and 220V with which 24V-actuators can be controlled. Different handsets complete this range of products.
- Up/Down
- Compact size (L x B x H): 50,5 x 57,7 x 24,4 mm
- weight: 35 gr.
- Up/Down
- Compact size (L x B x H): 30,4 x 67,8 x 20,5 mm
- weight: 39 gr.
- Up/Down
- 4 memory positions
- 4-digit display for „inch“ or „cm“
- L x B x H: 150,3 x 183,6 x 38,8 mm
- weight: 171 gr.
- Up/Down
- Up to 2 motor groups
- 4 memory positions
- 3-digit display for „inch“ or „cm“
- L x B x H: 119 x 129 x 9,6 mm
- weight: 130 gr.
- Flat, compact design
- Highly efficient switching power supply
- For up to 3 motors. Max. 8A per channel, in total max. 16A
- Output voltage: 24V
- Support of hall sensors
- Up to 2 motor categories (operation only with handset EEL-LDH-ST2)
- Cascading of up to 4 S1 controllers
- 0,3 watt Standby-consumption (0,1 watt optional)
- Dimensions: 264 x 103 x 37 mm
- Operating temperature: +0° – +30°C
- Protection rating: IP 20
- Controllers for EU power supply voltage (230V / 50Hz) and U.S. power supply voltage (120V / 60Hz) available
HS = Handset
1 = Motor 1
2 = Motor 2
3 = Motor 3
K = for external sensors, anti-squeeze protection bar and cascading
NB = Power plug
E = Grounding
With our “Technical Support” you have a direct line to our technicians, who will competently assist you. If you have questions about offers, availability or prices, our commercial support will be happy to assist you.