Release Systems

Lever release system

Release head / Release lever

Release lever in “function”
  • 1Gas spring release head standard
  • 2Pivot point
  • 1aRelease lever (release direction towards spring)
  • 2aRelease lever (release direction towards the spring)
  • 1bRelease lever (release direction away from spring)
  • 2bRelease lever (release direction away from spring)
Flat grip for release lever

Variable release lever

Gas spring can be released from both sides and by moving up or down.

  • 1Two mounting holes, 90° offset
  • 2Variable Release lever (additional with cone handle)

10.000 N maximum load in pull direction

For lockable gas springs with short release and piston rod thread M8*1, a release pin overlength of 4.5 mm is necessary

Cone grip for release lever

Bowden cable release systems

Bowdenwire release system linear

Bowdenwire release system linear

Comfortable releasing of gas springs with an extension force up to 300N.

The release system can be combined with SET 001 – SET 003 (please mention on your order)

Length mm
  • 500
  • 750
  • 1000
  • 1250
  • 1500
Code
  • 20BZ0500MDAAKP
  • 20BZ0750MDAAKP
  • 20BZ1000MDAAKP
  • 20BZ1250MDAAKP
  • 20BZ1500MDAAKP

Bowden Wire

(The release system will always be delivered with mounted bowden wire)

Easytouch by wire

Bowden wire release system for lockable gas springs with release travel < 1mm

Comfortable releasing of gas springs with an extension force up to 600N

Bowden wire release system easytouch standard 
  • 1Stroke = 10mm, release ratio 10:1
  • 2Easytouch release system g
  • 3Alternative connecting
  • 4Bowden wire 20BZLLLLTAAKP
  • 5Release head (mounted)
  • 6Lockable gas spring with short releaseg
  • 7Coil spring
Bowden wire standard dimensions
Length mm
  • 500
  • 750
  • 1000
  • 1250
  • 1500
Teile-Nr.
  • 20BZ0500TAAKP
  • 20BZ0750TAAKP
  • 20BZ1000TAAKP
  • 20BZ1250TAAKP
  • 20BZ1500TAAKP
Taster
20ET1
  • plastic, with coil spring
20ET2
  • plastic, without coil spring
20ET1ALU
  • Aluminium, with coil spring
20ET2ALU
  • Aluminium, without coil spring
20ET2ALULA
  • Push button with long bushing, aluminium, without coilspring

Fixed release mechanism

Fixed release mechanism

20BAXXMXX

range of use: 

for adjusting, short-term releasing and permanent releasing

  • 1bowden wire
  • 2basic position
  • 3adjusted lever
Bowdenwire with Z-hook standard dimensions
Length
mm
  • 500
  • 750
  • 1000
  • 1250
  • 1500
Part no.
  • 20BZ0500HAP
  • 20BZ0750HAP
  • 20BZ1000HAP
  • 20BZ1250HAP
  • 20BZ1500HAP

Flat grip

Bowden Wire Release System for lockable gas springs with release travel < 1mm

20FT2 Flat grip
Ø Piston rod
  • 8 mm
  • 10 mm
  • 14 mm
Progressivity 50%
  • 400N
  • 700N
  • 1800N
Progressivity 100%
  • 300N
  • 500N
  • 1000N
Bowden wire standard dimensions
Code
  • 20BZ0500TAAKP
  • 20BZ0750TAAKP
  • 20BZ1000TAAKP
  • 20BZ1250TAAKP
  • 20BZ1500TAAKP
Length mm
  • 500
  • 750
  • 1000
  • 1250
  • 1500

Release head for bowden wire (Accessories)

Limit stop cushion
Code
 
  • 20AGXXU10*20*680
  • 20AGXXU10*20*690
  • 20AGXXU08*20*680
ØI
 
  • 10
  • 10
  • 8
ØA
 
  • 20
  • 20
  • 20
H
 
  • 6
  • 6
  • 6
Hardness
(Shore)
  • 80
  • 90
  • 80
Nuts for lockable gas springs
Code
 
  • XXMUM8*1DIN439
  • XXMUM10*1DIN439
  • MUM14*1,5SW19
M
 
  • M8*1
  • M10*1
  • M14*1,5
SW
 
  • 13
  • 17
  • 19
h mm
 
  • 4
  • 5
  • 5
Bowden wire fastener
Code
 
  • 20BHXXU40
 
 
  • Bowden wire fastener suitable for release heads with dimension A = 54mm

Hydraulic release systems

Classic hydraulic

5.1 Classic hydraulic release
5.2 Classic hydraulic release system with 1 release cylinder for 2 gas springs
5.3 Classic hydraulic release system with 2 release cylinders for one gas spring

Accessories

Angular connector at the release head 20KNXXU04
Nuts XXMUM16*1.5*5.5

Easytouch System

Easytouch hydraulic release for lockable gas springs

The hydraulic release system allows for an elegant and comfortable operation of lockable gas springs. A well-designed button combined with the perfect integration of the hydraulic hose in your product allows fixing points around both corners and edges. We also provide the option of variants that allow you to release two lockable gas springs simultaneously, or release one gas spring from two different points. Our hydraulic releases are suitable for temperatures from 0ºC to 45ºC.

Note: The bending radius may not be smaller than 50mm.

Easytouch short release system with / without push button

H56

with angular connector at push button

Available with M81 and M101 thread

H57

with straight connector at push button

Available with M81 and M101 thread

Order-Example
H
  • H =Shorthand for hydraulic release “Easytouch”
  • HK =Shorthand for hydraulic release “Classic”
2
  • 2 = one release cylinder and two release heads
  • 3 = two release cylinders and one release heads
  • 4 = two release cyliinder and two release heads
  • *Digit not applicable with 1 push button and 1 release head.
5
  • ø 5
  • ø 6
  • Release pin diameter at the release cylinder
6
  • 6 = angle connector at release cylinder
  • 7=straight connector at release cylinder
A
  • A = M10*1
  • B = M8*1
  • release head thread for piston rod
08
  • 08 = 8mm
  • 10 = 10mm
  • hole diameter at the release head, always 2 digits
W
  • W = angle
  • G straight hose connector at the release head
090
  • adjustment angle, always 3 digits (needed only when an angle connector at the release head is required)
0600
  • hose length, always 4 digits
B
  • B = Special requirements
  • extras see note
–
  • always only 1 hyphen
001
  • * index no. – only necessary for repeating orders. You will receive the index no. with the order confirmation / invoice. 

Accessories for Easytouch

SET 001
Plastic bushing 25*22*M16*1.5
Push button 18.5*10*M4
SET 002

Aluminium bushing 39*25*M16*1.5

Push button 18.5*10*M4

SET 003


Aluminium bushing 39*25*M16*1.5

Push button 18.5*10*M4

Release heads

Release head horizontal

Type of
construction
  • 20AK9010M8*1
  • 20AK9010M10*1
  • 20AK9008M8*1
  • 20AK9008M10*1
  • 20AK90M5M8*1
  • 20AK90M5M10*1
A mm
  • 28
  • 28
  • 28
  • 28
  • 28
  • 28
B mm
  • 30
  • 30
  • 30
  • 30
  • 30
  • 30
C mm
  • 38
  • 40
  • 38
  • 40
  • 38
  • 40
D mm
  • R8,5
  • R8,5
  • R8,5
  • R8,5
  • R8,5
  • R8,5
D1 Ø mm
  • Ø10,1-0,05
  • Ø10,1-0,05
  • Ø8,1-0,05
  • Ø8,1-0,05
  • Thread on the end face M5*6 (without hole D1)
E Ø mm
  • 4
  • 5
  • 4
  • 5
  • 4
  • 5
F mm
  • Ø17
  • Ø17
  • Ø17
  • Ø17
  • Ø17
  • Ø17
G mm
  • 11
  • 11
  • 11
  • 11
  • 11
  • 11
H mm
  • 18
  • 18
  • 18
  • 18
  • 18
  • 18
J mm
  • 38,5
  • 38,5
  • 38,5
  • 38,5
  • 38,5
  • 38,5
M1 mm
  • M8*1
  • M10*1
  • M8*1
  • M10*1
  • M8*1
  • M10*1
Groove
  • 13
  • 17
  • 13
  • 17
  • 13
  • 17
At screwed
depth mm
  • 8
  • 8
  • 8
  • 8
  • 8
  • 8

Standard release head for bowden wire

type of
construction
  • 20AK08M8*1
  • 20AKXXMXX
  • 20AK10M10*1
  • 20AK12M10*1
  • 20AK12M14*1,5
  • 20AK14M14*1,5
max. load
inpull direction
  • 7.000
  • 7.000
  • 12.000
  • 12.000
  • 12.000
  • 12.000
A mm
  • 37
  • 37
  • 54
  • 54
  • 54
  • 54
B mm
  • 30
  • 30
  • 39
  • 39
  • 39
  • 39
C mm
  • 38
  • 40
  • 50
  • 50
  • 50
  • 50
D mm
  • R8,5
  • R8,5
  • R14
  • R14
  • R14
  • R14
D1 Ø mm
  • 8,1-0,05
  • 10,1-0,05
  • 10,1-0,05
  • 12,1-0,05
  • 12,1-0,05
  • 14,1-0,05
E Ø mm
  • 17
  • 17
  • 21
  • 21
  • 21
  • 21
F mm
  • SW11
  • SW11
  • SW14
  • SW14
  • SW14
  • SW14
G mm
  • 20
  • 20
  • 26
  • 26
  • 26
  • 26
H mm
  • 38.5
  • 38.5
  • 53
  • 53
  • 53
  • 53
M1 mm
  • M8*1
  • M10*1
  • M10*1
  • M10*1
  • M14*1.5
  • M14*1.5
Nut (SW)
  • SW13
  • SW17
  • SW17
  • SW17
  • SW19
  • SW19
At screwed depth mm
  • 9
  • 7
  • 8
  • 8
  • 8
  • 8

Contact

We are there for you.
+49 (0)7172 / 9107-0
info@bansbach.de

With our “Technical Support” you have a direct line to our technicians, who will competently assist you. If you have questions about offers, availability or prices, our commercial support will be happy to assist you.

More about bansbachmake an online appointment