#THISISBANSBACH
don´t be afraid of demanding environments
Stainless steel in-line actuators are also a standard option for all our actuators (except easyeE-25). Stainless steel is often used in industrial and marine applications, but is not limited to these applications. Stainless steel actuators are suitable for environments where the applications are exposed to saltwater or have to fulfil special requirements, such as in the food industry. The high-quality stainless steel (AISI 316) offers a high level of protection against environments exposed to seawater or industrial cleaning with chemicals, etc…
We use high-quality stainless steel (AISI 316) for the production of our high-quality stainless steel in-line actuators. These in-line actuators are not only water resistant, but are also frequently used in food, chemical, medical and salt water applications. The version for harsh environments is tested to IP68 and IP69 and has the criteria for a depth of one metre for one hour.
The easyE-30(i), easyE-50(i) and easyE-60(i) models are all available in stainless steel. These drives are frequently used in the marine, food, medical, chemical and many other industries.
Our stainless steel easye-(i)
Material:
Motor and drive tube are made of stainless steel
Stainless steel piston rod
Front and rear brackets are made of stainless steel
Protection class:
IP66 (standard), harsh environment (according to IP68 and IP69)
Max. static load/self-locking force:
easyE-35: 5400N
easyE-50: 16800N
easyE-60: 18100N
Depending on the stroke length for push applications.
Stroke length:
50, 100, 150, 200, 250, 300, 350, 400, 500 and 750mm
Temperature:
Operation: -20ºC to +70ºC (easyE-35 and easyE-50) -20°C to +50°C (easyE-60)
Storage: -40ºC to +70ºC
Duty cycle:
Max. 10% or 2 minutes in use followed by 18 minutes break
easyE-35 12/24VDC
- Force24V (dyn. push and pull) [N]
- Speed at maximum load [mm/s]
- Kraft 12V (dyn. in Zug und Druck) [N]
- Speed at maximum load [mm/s]
- 120
- 33
- –
- –
- 400
- 16
- 400
- 16
- 600
- 12
- 600
- 9
- 900
- 7,5
- 900
- 7,5
- 1600
- 4
- 1500
- 3,5
- 2200
- 3
- 2000
- 2,5
Current at maximum load: 12VDC(max 14 VDC) = 3,6A, 24VDC(max 28 VDC) = 1,8A
easyE-50 12/24VDC
- Force24V (dyn. push and pull) [N]
- Speed at maximum load [mm/s]
- Kraft 12V (dyn. in Zug und Druck) [N]
- Speed at maximum load [mm/s]
- 500
- 70
- –
- –
- 1750
- 20
- 1400
- 14
- 2200
- 17
- 1700
- 10
- 3100
- 12
- 2400
- 6
- 4500
- 6
- 4500
- 4500
- 4
- 4500
Current at maximum load: 12VDC (max 14 VDC) = 16A (ratio C-F), 14A (G), 9A (H), 24VDC (max 28VDC) = 8A (C-F), 7A (G), 4,5A (H)
easyE-60 24VDC
- Force24V (dyn. push and pull) [N]
- Speed at maximum load [mm/s]
- –
- –
- 1900
- 26
- 4300
- 12
- 6600
- 8
- 8100
- 6
- 1000
- 5
Max. load limited for stroke > 400mm: 1000N (easyE-35), 2000N (easyE-50), 5000N (easyE-60)
*only 24V DC power supply
Installation length
Axial backlash: +/- 0,5mm, generally length tolerance +/- 1mm
- easyE-35: Gear ratio: C/5, D/14, E/19, F/27
- easyE-35: Gear ratio: G/51,H/71
- easyE-50: Gear ratio: C/4, D/14, E/17, F/24
- easyE-50: Gear ratio: G/49,H/84
- easyE-60: Gear ratio: all ratios
(EL mm)
- stroke + 160*
- stroke + 170*
- stroke +240**
- stroke +255**
- stroke +358***
- 35
- 35
- 50
- 50
- 60
- 28
- 28
- 40
- 40
- 50
- 20
- 20
- 30
- 35
- 35
- +10
- +10
- –
- –
- –
- +10
- +10
- +15
- +15
- +15
- +10
- +10
- +15
- +15
- –
environment
- +11
- +11
- +14
- +14
- +25
*If stroke >400mm: EL+7mm, if stroke >700mm: EL+42mm
**If stroke >750mm: EL+100mm (on request)
***If stroke >400mm: EL+25mm (not Harsh-Environment-version)
NEW!
easyE-35 / 35i & easyE-50 / 50i for underwater use.
The Bansbach UW100-series of actuators are developed and tested for under water applications down to 100 m. The actuators come in stainless steel (AISI316) and have extra sealing to protect against the high water pressure.
24VDC power supply (max. 28VDC), permanent magnet motor, 1,8ADC (2,5ADC for 35i)
- Force 24V (dyn. push and pull) [N]
- Speed at maximum load [mm/s]
- 300
- 12
- 500
- 7,5
- 1300
- 4
- 1900
- 3
easyE-35/35i 12VDC Stromversorgung (max. 14VDC), 3,6ADC (4,0ADC für 35i)
- Force 24V (dyn. push and pull) [N]
- Speed at maximum load [mm/s]
- 300
- 9
- 500
- 7,5
- 1100
- 3,5
- 1900
- 2,5
Maximum load is specified at 100 meter water pressure, higher forces can be expected at lower pressure
Stroke length is limited to max. 400mm.
Hall sensor included in all models.
- Gear ratio E/19, F/27
- Gear ratio G/51, H/71
- Stroke + 201
- Stroke +211
Axial backlash: +/- 0.5mm, General dimensional variation: +/- 1mm
24VDC power supply (max. 28VDC), permanent magnet motor, 14-24: 8ADC, 49: 7ADC, 84: 4,5ADC
- Force 24V (dyn. push and pull) [N]
- Speed at maximum load [mm/s]
- 1050
- 20
- 1500
- 17
- 2400
- 12
- 3800
- 6
- 4500
- 4
easyE-50/50i 12VDC power supply (max. 14VDC), permanent magnet motor, 14-24: 16ADC, 49: 14ADC, 84: 9ADC
- Force 24V (dyn. push and pull) [N]
- Speed at maximum load [mm/s]
- 750
- 14
- 1200
- 10
- 1700
- 6
- 3800
- 3
- 4500
- 3,5
Maximum load is specified at 100 meter water pressure, higher forces can be expected at lower pressure
Stroke length is limited to max. 400mm.
Hall sensor included in all models.
- Gear ratio D/14, E/17, F/24
- Gear ratio G/49, H/84
- Stroke + 291
- Stroke +306
Axial backlash: +/- 0.5mm, General dimensional variation: +/- 1mm
General information
The water tightness covers the actuator including cable. Connector or open ends are not covered by this classification.
