# THIS IS BANSBACH
YOur temperature expert
Our gas springs stays cool!
Bansbach easylift gas springs are high quality products and can be used in extreme applications depending on the design. Numer-ous factors influence the durability of our gas springs and accordingly the limits must not be exceeded. Basis are standard types according to our catalogue. Dimensional changes from standard lengths are
possible, but must be requested individu-ally. Please note that the damping behavior/lifetime can be affected when used in the maximum temperature ranges. We have defined 4 ranges for the optimum products in our temperature scales.
- Standard-Setup
- Cold-Setup*
- Aerospace*/extreme applications-Setup
- Heat-Setup
- Standard
- Cold resistant
- Cold resistant
- Heat resistant
static, no movement
- -30°C
- -40°C
- -55°C
- -20°C
static, no movement
- +80°C
- +80°C
- +80°C
- +200°C
low
- -20°C
- -30°C
- -40°C
- -10°C
high
- +70°C
- +70°C
- +70°C
- see table
- 06/15mm
- 08/19mm
- 10/22mm
- 10/28mm
- 14/28mm
- 20/40mm
- 200N
- 350N
- 500N
- 640N
- 750N
- 1750N
- 230N
- 370N
- 530N
- 690N
- 800N
- 1900N
- 260N
- 420N
- 600N
- 780N
- 930N
- 2170N
*In minus temperature we recommend using a scraper
Attention: Reduced forces!
When using high-temperature sealings, numerous in-fluencing factors must be taken into account. The maximum permissible extension force per series de-pends on the desired operating temperature.
The specific test in your application is strongly recommended.