• easyE-line

Features:

  • Stroke: 50, 100, 150, 200, 250, 300, 350, 400, 500 and 750mm (others on request)
  • Materials:
    Motor and actuator tube are powder coated steel or stainless steel
    Piston rod is stainless steel
    Front and rear brackets are aluminium or stainless steel
  • Protection class: IP66 (standard), harsh environment (according to IP68 and IP69)
  • Temperature:
    Operation: -20°C to +50°C
    Storage: -40ºC to +70ºC
  • Cable: 1m, 2X1.3mm² (AWG16), Ø=6.4mm, black, Molex Mini-Fit Jr. 6 pin
  • Bending radius: 6x cable diameter
  • Max. static load/Self locking force: 16800N, depending on stroke length for push-applications
  • Duty cycle: Max. 10% or 2 minutes in use followed by 18 minutes rest

CAD-Configurator 

Configure quick and simply the CAD files of your easyE-60.

CAD Configurator

CAD Configurator

Configure the CAD data of your easyE-line actuator.

Configurate...

Speed and force

24VDC - Current at maximum load: 11,5A

 Gear ratio D E F G H
 Force (dyn. push and pull) [N] 1900 4300 6600 8100 10000
 Speed at maximum load [mm/s] 26 12 8 6 5
Max. load limited for stroke length > 400mm: 5000N  

Speed/Force

easyE Speed Force 60

Force/Current

easyE Force Current 60

Dimensions

easyE Einbaulaenge 60 e

EL Clevis rear Hall Sensor UL/EN60.601 harsh environment Emergency
lowering/spline
stroke + 358* - +15 +15 +25 +31/+10

*If stroke >400mm: EL+25mm (not Harsh-Environment version)
Axial backlash: +/- 0,5mm, generally length tolerance +/- 1mm

Weight of the actuators:

 Stroke length [mm]
50 100 150 200 250 300 350 400 500 750
 Weight [kg] 4,1 4,4 4,7 5 5,3 5,6 5,9 6,2 6,8 7,6

Actual weight may vary depending on model and options selected

Connecting parts "Motor-Side":

Hinge eye

Hinge eye
Aluminium
  • Code: A3M
  • Maximum static load: 16800N
Stainless steel (316)
  • Code: C3M
  • Maximum static load: 16800N

Hinge eye with spherical bearing

Hinge eye with spherical bearing
Aluminium
  • Code: E3M
  • Maximum static load: 11000N
Stainless steel (316)
  • Code: J3M
  • Maximum static load: 11000N

Clevis

Clevis
Aluminium
  • Code: F3M
  • Maximum static load: 16800N
Stainless steel (316)
  • Code: H3M
  • Maximum static load: 16800N

Connecting part "piston rod-Side":

Hinge eye

Hinge eye
Aluminium
  • Code: A3K
  • Maximum static load: 16800N
Stainless steel (316)
  • Code: C3K
  • Maximum static load: 16800N

Hinge eye with spherical bearing

Hinge eye with spherical bearing
Aluminium
  • Code: E3K
  • Maximum static load: 11000N
Stainless steel (316)
  • Code: J3K
  • Maximum static load: 11000N

Clevis

Clevis
Aluminium
  • Code: F3K
  • Maximum static load: 16800N
Stainless steel (316)
  • Code: H3K
  • Maximum static load: 16800N

Recommended Mounting Methods:

  • Do not clamp actuators on tubing
  • Always keep both brackets mounted in the same orientation and ensure to flush mount actuator
  • Brackets must always be able to rotate on axels in mountings
  • Avoid radial forces at all times

For the fixation of the easyE-line actuators we offer the following brackets:

EEL900BA60-1KS

EEL900BA60-1KS

Piston rod side
Max. load: 5.000N
Order No.: EEL900BA60-1KS
EEL900BA60-1MS

EEL900BA60-1MS

Motor side
Max. load: 5.000N
Order No.: EEL900BA60-1MS

easyE Montage

Please note

  • Never expose the actuator to hammer strike during installation or in other situations
  • Retrofitted bushings should be pressed into the bracket-borings. No hammering
  • Power supply without over-current protection can cause serious damage to the actuator at mechanical end-stop or when actuator is overloaded in another way
  • Keep piston tube clean
  • Longer cable lengths may cause voltage drop which affects the performance of the actuator
  • For medical applications (IEC/EN/UL60601-1): Operating temperature +5ºC to +48ºC, Relative humidity 20% - 70% atmospheric pressure = 1atm. Connect to medically approved supply source only and according to guidelines provided with the source
  • Function of the actuator is subject to the settings of the control box
  • The dust and water sealing of harsh environment actuators might affect their performance
  • All specifications are for 25 ºC ambient – low temperature might affect performance
  • Depending on load and application, nominal and actual stroke length may differ due to internal disc springs not being fully compressed.

Bansbach® easylift - the world of motion!

Bansbach easylift® has been developing and producing all types of gas springs for more than 50 years.
Our springs are quality-certified to fulfill the highest requirements for industries such as aerospace, industrial, medical, furniture and more!

Cookies make it easier for us to provide you with our services. With the usage of our services you permit us to use cookies.
More information Ok