Details

A1	A1	-	4	0	200	483	001*	500N
Connecting parts piston rod	Connecting parts cylinder	Model	Push-out speed / damping	Diameter piston rod / cylinder Øx/Øy mm	Stroke A mm	Extended length (**see below))	Index No. (*see below)	Extension-force F1 (N)	Progressivity ca. %
see Connecting parts	see Connecting parts	– = standard A = according to your drawing B = according to our drawing C = with scraper D = with covertube (-40°C to 60°C ) E = with neutral labels F = with valve inside the cylinder H = with special seals for temperatures up to 200°C I = Stainless steel, AISI Nr. 304 N = Stainless steel, AISI Nr 316L R = with increased friction F1 min: 6/15 = 100N 6/22 = 100N 8/19 = 120N 8/28 = 120N 10/22 = 150N 14/28 = 200NS S = with lockable cover tube (thread M8, above 150 mm stroke, up to 160°C) T = with floating pistonT	0 =fast, no end damping 1 = fast, normal end damping 2 = fast, increased end damping 3 = normal, no end damping 4 = normal, normal end damping 5 = normal, increased end damping 6 = slow, no end damping 7 = slow, normal end damping 8 = slow, increased end damping 9 = other variations To recognize end damping please install with piston rod downwards	K = 3/8	10 - 120	2x Stroke+26		7-110	28
				P = 3/10	10 - 120	2x Stroke+26		7-110	20
				G = 4/12	10 - 150	2x Stroke+30		7-200	21
				6 = 6/15	10 - 150	2x Stroke+30		10-400	27
				C = 6/19	10 - 150	2x Stroke+42		10-400	16
				D = 6/22	10 - 150	2x Stroke+43		10-400	11
				O = 8/19	10 - 300	2x Stroke+48		30-700	33
				1 = 8/22	10 - 300	2x Stroke+48		30-700	22
				E = 8/28	10 - 300	2x Stroke+60		30-700	13
				2 = 10/22	20 - 800	2x Stroke+47		50-1300	39
				3 = 10/28	20 - 800	2x Stroke+59		50-1300	21
				4 = 12/28	20 - 1000	2x Stroke+60		100-1700	33
				5 = 14/28	20 - 1000	2x Stroke+60		150-2600	52
				N = 16/28	20 - 1000	2x Stroke+60		200-3200	85
				A = 10/40	20 - 1000	2x Stroke+68		50-1300	8
				F = 12/40	20 - 1000	2x Stroke+69		100-1700	13
				B = 14/40	20 - 1000	2x Stroke+69		150-2600	18
				7 = 20/40	20 - 1000	2x Stroke+85		200-5000	45
				R = 22/40	20 - 1000	2x Stroke+85		300-6000	60
				M = 30/70	100 - 800	2x Stroke+120		1000-12000	33

Options

Diameter piston rod/cylinder Øx/Øy mm	Scraper EL2+10mm	Cover tube EL2+10mm	Cover tube alu EL 2 + 3 mm (Ø40 +5mm)	Valve	High-temperature seals	Low-temperature seals	Stainless steel	Friction EL2+10mm	Lockable cover tube EL2+26 mm (stroke min 120mm)	Floating piston
K = 3/8
P = 3/10										x
G = 4/12				x						x
6 = 6/15	x (EL2+5mm)		x	x +2mm	x	x	x	x		x
C = 6/19	x	plastic	x	x	x	x				x
D = 6/22	x	plastic	x	x	x	x				x
O = 8/19	x	plastic+ steel	x	x	x	x	x	x		x
1 = 8/22	x	plastic	x	x	x	x		x		x
E = 8/28	x	plastic	x	x	x	x				x
2 = 10/22	x	plastic	x	x	x	x	x	x	x	x
3 = 10/28	x	plastic	x	x	x	x	x		x	x
4 = 12/28	x	plastic	x	x	x	x		x		x
5 = 14/28	x	plastic	x	x	x	x	x	x	x	x
N = 16/28		plastic	x	x						x
A = 10/40	x	steel	x	x	x	x	x			x
F = 12/40	x	steel	x	x	x	x				x
B = 14/40	x	steel	x	x	x	x	x			x
7 = 20/40	x		x	x	x	x	x			x
R = 22/40			x	x						x
M = 30/70	standard			standard						x

**Attention: Calculation of the extended length

EL1

The total length is calculated when the piston rod is extended. Please add the length of the connecting parts in order to find out the total length.

EL2

length EL2 = measured without hinge eyes and threads

*Index number

Index No.

With the index no. – only necessary for repeating orders – we can reproduce exactly the same gas spring which has already been produced. You will receive the index no. with the order confirmation / invoice.

Options

**Attention: Calculation of the extended length

*Index number

Bansbach® easylift - the world of motion!