Gas traction springs without damping
| B1 | B1 | Z | - | 3 | 100 | 214 | 001* | 400N | |
| Connecting parts piston rod |
Connecting parts cylinder |
Model | Design | Diameter piston rod/cylinder Øx/Øy mm |
Stroke | Length inserted(**see below) |
Index No. (*see below) |
Pull-in force F (N) |
Progressivity (at stroke >100mm)* |
| see Connecting parts | see Connecting parts |
Z = |
– = standard (no damping) F P=06/19 and 10/28, low progressivity B= Special |
C = 6/19 1 = 8/22 3 = 10/28 B = 14/40 |
C = 10-300 1 = 10-300 3 = 10-600 B 10-600 as required |
C = 1 = 3 = P3= Stroke +100 mm B = |
pulled-in 100-4000 as required, measured 5 mm before inserted position, C= 50-300N |
C= ca. 55% PC= ca. 15% 1= ca. 15% 3= ca. 70% P3= ca. 30% B= ca. 70% |
*Progressivity at stroke >100mm lower and on request
Gas traction springs with damping
| B1 | B1 | Z | 5 | 3 | 100 | 309 | 001* | 400N | |
| Connecting parts piston rod |
Connecting parts cylinder |
Model | Design | Diameter piston rod/cylinder Øx/Øy mm |
Stroke | Length inserted(**see below) |
Index No. (*see below) |
Pull-in force F (N) |
Progressivity |
| see Connecting parts | see Connecting parts |
Z = |
see gas springs |
C = 6/19 mm 1 = 8/22 mm 3 = 10/28 mm B = 14/40 mm |
10-200
as required |
C = 2x Stroke + 64 mm 1 = 2x Stroke + 64 mm 3 = 2x Stroke + 72 mm B = 2x Stroke + 100 mm |
pulled-in 50-2500 as required, measured 5 mm before inserted C= 50-300N |
C=25% 1=25% 3=40% B=40% |
**Attention: Calculation of extended length
| EL1 |
| The total length is calculated when the piston rod is inserted. Please add the length of the connecting parts in order to find out the total length. |
| EL2 |
| length EL2 = measured without hinge eyes and threads |
*Index Number
| Index Nr. |
| With the index no. – only necessary for repeating orders – we can reproduce exactly the same gas spring which has already been produced. You will receive the index no. with the order confirmation / invoice. |
