Quick-Ship

Within the ranges shown, you can select your optimum dimension yourself. The tolerance for the installation lengths is generally ± 2.5 mm, within a series production a manufacturing tolerance of max. ± 1 mm applies. For high demands on durability and stability, please avoid the combination: small diameter + long stroke + high force.

Damping characteristics can generate vibrations that find a resonant body in the application, causing noise. Small changes to the installation, fasteners or tuning can remedy the situation.

Bansbach gas springs have been designed and tested for the highest requirements and greatest possible reliability. Installation recommendations and our comprehensive advice will support you in the selection of your individual gas springs.

But: The suitability test for the respective application is always the responsibility of the user! Products which are unsuitable for the application and defective products must not be used. We therefore exclude any liability for the functionality and service life of your end product.

Bansbach gas springs are manufactured to order – from mostly stock components. Cancellation, subsequent modification, exchange or return is therefore not possible.

If gas springs are sent in for detailed inspection, this constitutes consent to the destruction of this part, and the right of ownership thereby expires. Return of individual components is not possible. If necessary, mark submissions with e.g. “For functional test and with request for return”. If there is no objection, gas springs sent in will be disposed of 1 week after notification of the test result.

As a general rule: For unjustified complaints we reserve the right to charge a lump sum or the actual costs for processing and disposal.

Warranty claims expire in principle no later than 1 year after the date of manufacture of the gas spring. Manufacturing defects or quality defects in the gas spring can be detected immediately. If you are not satisfied with the delivered quality of the gas spring for a particular reason, please return it immediately. Please enclose the reason and an original copy of the invoice!

Bansbach gas springs can be stored in any position. Pressure loss of the gas spring due to long storage is not to be expected. No negative empirical values are available. However, sticking effects can occur, which require a higher effort when the gas spring is actuated for the first time (breakaway force).

The piston rod must be protected from impact, scratches and contamination – especially paint application. The cylinder tube must not be deformed. Damage to the surface will destroy the gas spring sealing system.

Gas springs are maintenance-free. Do not grease or oil the piston rod.

If gas springs are damaged visibly (broken or deformed connecting parts, bended piston rod, dented cylinder) due to external cause (accident, collision, extreme overloading,…) the pressure has to be released before the gas spring is being dismantled or used.

Please note our disposal and recycling instructions!

Gas springs should not be exposed to any tilting or sideforces during operation. If this is unavoid able, please check the installation and use suitable connecting parts.

Gas springs should be installed with the piston rod downwards. This position ensures the best damping effect. Only Bansbach gas springs include an integrated grease chamber which allows different directions of installation.

All gas springs are labeled with the warning „Do not open, high pressure“, the part number and the production date. If these dates are unreadable (removed, painting of the gas springs or any other influences) we refuse the liability for damages which result from this fact. Warranties aren’t possible anymore.

Disposal / recycling: Gas springs are mainly made of metal and can be recycled. However, the gas springs must be depressurised beforehand. Please request our disposal instructions for gas springs.

Gas springs are filled with pure nitrogen. Nitrogen is an inert gas, does not burn, does not explode and is not toxic. However: gas springs have a very high internal pressure (up to approx. 300 bar). Gas springs must never be opened without instructions!

Bansbach gas springs can be used at ambient temperatures from -30℃ to +80℃. For other temperature ranges (down to -55℃ or up to +200℃) special seal sets are available. For low-temperature ranges, detailed coordination of the requirements is necessary. The ambient temperature has an influence on the gas spring characteristics. Changes in extension force as well as damping characteristics are to be expected and should be tested in advance under application conditions. Do not overheat gas springs or place them in an open fire! Other environmental conditions can also have a significant influence on the service life. Please take protective measures into consideration.

Within the ranges shown, you can select your optimum dimension yourself. The tolerance for the installation lengths is generally ± 2.5 mm, within a series production a manufacturing tolerance of max. ± 1 mm applies. For high demands on durability and stability, please avoid the combination: small diameter + long stroke + high force.

Damping characteristics can generate vibrations that find a resonant body in the application, causing noise. Small changes to the installation, fasteners or tuning can remedy the situation.

Bansbach gas springs have been designed and tested for the highest requirements and greatest possible reliability. Installation recommendations and our comprehensive advice will support you in the selection of your individual gas springs.

But: The suitability test for the respective application is always the responsibility of the user! Products which are unsuitable for the application and defective products must not be used. We therefore exclude any liability for the functionality and service life of your end product.

Bansbach gas springs are manufactured to order – from mostly stock components. Cancellation, subsequent modification, exchange or return is therefore not possible.

If gas springs are sent in for detailed inspection, this constitutes consent to the destruction of this part, and the right of ownership thereby expires. Return of individual components is not possible. If necessary, mark submissions with e.g. “For functional test and with request for return”. If there is no objection, gas springs sent in will be disposed of 1 week after notification of the test result.

As a general rule: For unjustified complaints we reserve the right to charge a lump sum or the actual costs for processing and disposal.

Warranty claims expire in principle no later than 1 year after the date of manufacture of the gas spring. Manufacturing defects or quality defects in the gas spring can be detected immediately. If you are not satisfied with the delivered quality of the gas spring for a particular reason, please return it immediately. Please enclose the reason and an original copy of the invoice!

Bansbach gas springs can be stored in any position. Pressure loss of the gas spring due to long storage is not to be expected. No negative empirical values are available. However, sticking effects can occur, which require a higher effort when the gas spring is actuated for the first time (breakaway force).

The piston rod must be protected from impact, scratches and contamination – especially paint application. The cylinder tube must not be deformed. Damage to the surface will destroy the gas spring sealing system.

Gas springs are maintenance-free. Do not grease or oil the piston rod.

If gas springs are damaged visibly (broken or deformed connecting parts, bended piston rod, dented cylinder) due to external cause (accident, collision, extreme overloading,…) the pressure has to be released before the gas spring is being dismantled or used.

Please note our disposal and recycling instructions!

Gas springs should not be exposed to any tilting or sideforces during operation. If this is unavoid able, please check the installation and use suitable connecting parts.

Gas springs should be installed with the piston rod downwards. This position ensures the best damping effect. Only Bansbach gas springs include an integrated grease chamber which allows different directions of installation.

All gas springs are labeled with the warning „Do not open, high pressure“, the part number and the production date. If these dates are unreadable (removed, painting of the gas springs or any other influences) we refuse the liability for damages which result from this fact. Warranties aren’t possible anymore.

Disposal / recycling: Gas springs are mainly made of metal and can be recycled. However, the gas springs must be depressurised beforehand. Please request our disposal instructions for gas springs.

Gas springs are filled with pure nitrogen. Nitrogen is an inert gas, does not burn, does not explode and is not toxic. However: gas springs have a very high internal pressure (up to approx. 300 bar). Gas springs must never be opened without instructions!

Bansbach gas springs can be used at ambient temperatures from -30℃ to +80℃. For other temperature ranges (down to -55℃ or up to +200℃) special seal sets are available. For low-temperature ranges, detailed coordination of the requirements is necessary. The ambient temperature has an influence on the gas spring characteristics. Changes in extension force as well as damping characteristics are to be expected and should be tested in advance under application conditions. Do not overheat gas springs or place them in an open fire! Other environmental conditions can also have a significant influence on the service life. Please take protective measures into consideration.