Dynamic groove

Due to the groove, which is installed in the cylinder tube in this gas spring variant, the damping characteristic of the gas spring can be adapted very individually to the respective customer requirements.

In this case, the damping is not effected via the nozzle, as is the case with conventional gas springs, but is controlled by the groove in the cylinder. This results in many advantages: The damping in this variant has an effect in every installation position. Whether horizontally or with piston rod upwards – the damping characteristic is always the same.

The damping intensity and characteristic can also be adapted more precisely to customer requirements. A very smooth transition into the damping is possible and thus spares the construction additionally.

The dynamic groove is available for the cylinder diameters 15, 19 and 22. The groove is designed so that the damping characteristics correspond to the individual requirements of the customer.

Features
  • Final damping guaranteed in any mounting position (horizontal or with piston rod pointing upwards)
  • Controlled damping possible regardless of position
  • Individual damping characteristics over the complete stroke possible
Connecting part piston rod
  • See
  • Catalog
Connecting part cylinder
  • See
  • Catalog
Model
  • G
Push-out speed
  • Damping pull out
  • 4= normal, normal end damping
  • 5= normal, increased end damping
  • 7= slow, normal end damping
  • 8= slow, increased end damping
  • 9= other variations
  • Damping push in
  • E= normal, normal end damping
  • F= normal, increased end damping
  • H= slow, normal end damping
  • I= slow, increased end damping
  • J= other variations
  • Damping both directions
  • O= normal, normal end damping
  • P= normal, increased end damping
  • R= slow, normal end damping
  • S= slow, increased end damping
  • T= other variations
Size
  • 6= 6/15
  • C= 6/19
  • D= 6/22
  • 0= 8/19
  • 1= 8/22
  • 2= 10/22
  • 6= 6/15
  • C= 6/19
  • D= 6/22
  • 0= 8/19
  • 1= 8/22
  • 2= 10/22
Stroke
  • 40-150
  • 40-150
  • 40-150
  • 60-300
  • 60-300
  • 60-600
  • 80-150
  • 80-150
  • 80-150
  • 120-300
  • 120-300
  • 120-600
Extended length (EL1)
  • 2x stroke+ 30
  • 2x stroke+ 42
  • 2x stroke+ 43
  • 2x stroke+ 48
  • 2x stroke+ 48
  • 2x stroke+ 47
  • 2x stroke+ 55
  • 2x stroke+ 68
  • 2x stroke+ 69
  • 2x stroke+ 74
  • 2x stroke+ 70
  • 2x stroke+ 70
Index*
  • *The index number – only required for your repeat order – allows us to exactly reproduce products once they have been manufactured. You will receive the index code with the order confirmation/invoice.
Extension force F1 (N)
  • 30-400
  • 30-400
  • 30-400
  • 30-700
  • 30-700
  • 50-1300
  • 30-400
  • 30-400
  • 30-400
  • 30-700
  • 30-700
  • 50-1300