Main-Type K
Main-Type K
If a force is applied on the locked gas spring, the locking remains rigid up to the mechanical strength of the gas spring. If a force is applied in compressed direction, the spring remains rigid until the force of the pressure on the floating piston is exceeded (locking force). If this occurs, the piston rod inserts a little bit which may look like a overload safetydevice.
Rigid locking in extension, relatively rigid in compression
Here the locking function takes place in an oil chamber which is separated from the gas using a floating piston. If a force is applied on the locked spring in extension direction, because there is only oil between the piston and the guide piece, the locking force remains rigid up to the mechanical strength of the spring. If a force is applied in the compression direction, the spring remains rigid until the force of the pressure on the floating piston is exceeded (locking force).
cylinder/piston rod:
Possible article no.:
piston rod
- K0 = MF10x1x18
- O0 = MF14x1,5×20
- W0 = MF 8x1x16
cylinder
- see connecting parts
- K
- – = normal
- 0 = fast
- 7 = slow
- K = Short release (Release travel < 1 mm instead of < 3,5 mm)
- B = Special
- N = Stainless steel
- 6= 6/15
- C= 6/19
- D= 6/22
- 0= 8/19
- 1= 8/22
- E= 8/28
- 2= 10/22
- 3= 10/28
- A= 10/40
- 5= 14/28
- B= 14/40
- 10-150
- 10-150
- 10-150
- 10-300
- 10-300
- 10-300
- 10-500
- 10-500
- 10-500
- 30-700
- 30-700
- Stroke x 2,62 +57
- Stroke x 2,42 +57
- Stroke x 2,41 +65
- Stroke x 2,29 +65
- Stroke x 2,29 +66
- Stroke x 2,20 +66
- Stroke x 2,73 +73
- Stroke x 2,53 +73
- Stroke x 2,27 +73
- Stroke x 2,52 +74
- Stroke x 2,37 +74
- Stroke x 2,19 +74
- Stroke x 2,33 +78
- Stroke x 2,24 +78
- Stroke x 2,13 +78
- Stroke x 2,81 +83
- Stroke x 2,58 +83
- Stroke x 2,30 +83
- Stroke x 2,52 +77
- Stroke x 2,36 +77
- Stroke x 2,19 +77
- Stroke x 2,21 +99
- Stroke x 2,15 +99
- Stroke x 2,08 +99
- Stroke x 2,97 +93
- Stroke x 2,69 +93
- Stroke x 2,32 +93
- Stroke x 2,43 +99
- Stroke x 2,31 +99
- Stroke x 2,15 +99
- 35
- 50
- 35
- 50
- 35
- 50
- 35
- 50
- 100
- 35
- 50
- 100
- 35
- 50
- 100
- 35
- 50
- 100
- 35
- 50
- 100
- 35
- 50
- 100
- 35
- 50
- 100
- 35
- 50
- 100
- *see below
- 50-400
- 50-400
- 50-400
- 40-700
- 40-700
- 40-700
- 50-1300
- 50-1300
- 50-1300
- 150-2600
- 150-2600
- Reduced locking force
- Reduced locking force
- Reduced locking force
- Reduced locking force
- Reduced locking force
- Reduced locking force
- Reduced locking force
- Reduced locking force
- Reduced locking force
- Reduced locking force
- Reduced locking force
- 7.000
- 10.000
- 10.000
- 10.000
- 10.000
- 4 x F1
- 5,6 x F1
- 9 x F1
- 3,6 x F1
- 5,8 x F1
- 13 x F1
- 2,9 x F1
- 6,6 x F1
With the index no. – only necessary for repeating orders – we can reproduce exactly the same gas spring which has already been produced. You will receive the index no. with the order confirmation / invoice.
EL1
The total length is calculated when the piston rod is extended. Please add the length of the connecting parts in order to find out the total length.
EL2
length EL2 = measured without hinge eyes and threads.
Bansbach Connecting parts
Bansbach release systems
Release System With Lever
Bowden Wire Release System
Hydraulic Release System
Release lever in “function”
- 1Gas spring release head standard
- 2Pivot point
- 1aRelease lever (release direction towards spring)
- 2aRelease lever (release direction towards the spring)
- 1bRelease lever (release direction away from spring)
- 2bRelease lever (release direction away from spring)
Flat grip for release lever
construction
- 20AK08M8*1
- 20AKXXMXX
- 20AK10M10*1
- 20AK12M10*1
- 20AK12M14*1,5
- 20AK14M14*1,5
inpull direction
- 7.000
- 7.000
- 12.000
- 12.000
- 12.000
- 12.000
- 37
- 37
- 54
- 54
- 54
- 54
- 30
- 30
- 39
- 39
- 39
- 39
- 38
- 40
- 50
- 50
- 50
- 50
- R8,5
- R8,5
- R14
- R14
- R14
- R14
- 8,1-0,05
- 10,1-0,05
- 10,1-0,05
- 12,1-0,05
- 12,1-0,05
- 14,1-0,05
- 17
- 17
- 21
- 21
- 21
- 21
- SW11
- SW11
- SW14
- SW14
- SW14
- SW14
- 20
- 20
- 26
- 26
- 26
- 26
- 38.5
- 38.5
- 53
- 53
- 53
- 53
- M8*1
- M10*1
- M10*1
- M10*1
- M14*1.5
- M14*1.5
- SW13
- SW17
- SW17
- SW17
- SW19
- SW19
- 9
- 7
- 8
- 8
- 8
- 8
