At Bansbach easylift
the product is precisely adapted to your requirements in order to ensure optimal function. We are happy to support and advise you in the selection of the right product.
With our “Technical Support” you have a direct line to our technicians, who will competently assist you. If you have any questions about offers, availability or prices, our commercial support will be happy to assist you.
easyE-35
easyE-35 – Can be used almost anywhere
The slim actuator with 35mm diameter
Description
Type 35
Please note
- Power supply without over-current protection can cause serious damage to the actuator at mechanical end-stop or when actuator is overloaded in another way
- Radial forces might have an adverse affect on the performance or lead to damage of the actuator
- Keep piston tube clean
- Longer cable lengths may cause voltage drop which affects the performance of the actuator
- For medical applications (IEC60601-1, ANSI/AAMI/ES60601-1, CAN/CSA-C22.2 No60601-1):
- Operating temperature +5ºC to +48ºC, Relative humidity 20% – 70% atmospheric pressure = 1atm.
- Connect to medically approved supply source only and according to guidelines provided with the source
- The dust and water sealing of “harsh environment” actuators might affect their performance
- All specifications are for 25 ºC ambient – low temperature might affect performance
- Depending on load and application, nominal and actual stroke length may differ due to internal disc springs not being fully compressed
- The combination of gearing and stroke can cause limitations in the use of „End limit FW“ when using the S2-3 controller
Features:
- Stroke: 50, 100, 150, 200, 250, 300, 350, 400, 500 and 750mm (others on request)
- Materials:
- Motor and actuator tube are powder coated steel or stainless steel
- Piston rod is aluminum
- Front and rear brackets are PA, Aluminium or stainless steel
- Protection class: IP66 (standard), harsh environment (according IP68 and IP69)
- Temperature:
- Operation: -20ºC to +70ºC
- Storage: -40ºC to +70ºC
- Cable: 1m, 2X0.52mm² (AWG20), Ø = 4.8mm, black, Molex Mini-Fit Jr. 6 pin
- Bending radius: 6x cable diameter
- Max. static load/Self locking force:PA brackets: 2000N Alu/AISI: 5400N, depending on stroke length for push-applications
- Duty cycle: Max. 10% or 2 minutes in use followed by 18 minutes rest
Speed
Speed and forces
24VDC
24VDC (max 28VDC) – Current at maximum load: 1,8A
Gear ratio
- Force (dyn. push and pull) [N]
- Speed at maximum load [mm/s]
C
- 120
- 33
D
- 400
- 16
E
- 600
- 12
F
- 900
- 7,5
G
- 1600
- 4
H
- 2200
- 3
Max. load limited for stroke length >400mm: 1000N
SPEED/FORCE (24VDC)
SPEED/FORCE (12VDC)
12VDC
12VDC (max 14VDC) – Current at maximum load: 3,6A
Gear ratio
- Force (dyn. push and pull) [N]
- Speed at maximum load [mm/s]
C
D
- 400
- 16
E
- 600
- 9
F
- 900
- 7,5
G
- 1500
- 3,5
H
- 2000
- 2,5
Max. load limited for stroke length >400mm: 1000N
FORCE/CURRENT (24VDC)
FORCE/CURRENT (12VDC)
Dimension
Dimensions
- Gear ratio: C, D, E, F
- Gear ratio: G, H
EL
- Hub + 160*
- Hub + 170*
Clevis rear
- +10
Hall Sensor
- +10
UL/EN60.601
- +10
Harsh Environment
- +11
* Stroke length >400mm: EL+7mm, stroke length >700mm: EL +42mm
Axial backlash: +/- 0,5mm, generally length tolerance +/- 1mm
Weight of the actuators
- Stroke length [mm]
- Weight [kg]
- 50
- 0,8
- 100
- 0,9
- 150
- 1,0
- 200
- 1,1
- 250
- 1,2
- 300
- 1,3
- 350
- 1,4
- 400
- 1,6
- 500
- 1,8
- 750
- 2,3
Actual weight may vary depending on model and options selected
Connecting parts
Bansbach Connecting parts
Choose your connecting part.
Code
A1M
B1M
C1M
Ø mm
10
10
10
L5 mm
17,5
17,5
17,5
SW mm
28
28
28
A mm
6
–
6
Material
Alu
Polyamid (PA)
Edelstahl (316)
Max. Load [N]
5400N
2000N
5400N
Brackets
Bansbach Brackets
Here you will find our brackets for the easE-35
EEL900BA35-2KS
EEL900BA35-2MS
Controllers
EEL-S1
- easy Plug & Play solution
- for up to 3 motors parallel
- 120V and 220V available
EEL-S2-2
- Operation of 1 actuator
- Precise position control from analog voltage input
- Hall sensors mandatory
- Usable for all actuators
EEL-S2-3
- Operation of 2 actuator
- Synchronized parallel driving
- Hall sensors mandatory
- Usable for all actuators
EEL-S3
- Operation of 1 actuator
- Operación por Batería para uso móvil
- Up- and Down-Function
EEL-S4
- Operation of 1-4 actuator
- Battery powered for mobile use
- Individual or synchronous operation for drive 2-3-4 or 2+2 actuator
- Usable for all actuators
Step by step to the individual product
We build your gas spring!
The Bansbach gas spring configurator offers
you the possibility to put together your individual
gas spring from various components
even more easily and quickly.
Do you need help?
We are there for you
Contact person
Bansbach easylift
Stainless steel – Products
- » High-quality stainless steel material (V4A, AISI No. 316L)
- » Water resistant
- » Suitable for food, chemical and seawater applications
- » Connecting parts also made of stainless steel
FAQs
Are Bansbach gas springs ROHS compliant?
Yes, they are fully ROHS compliant and also meet all guidelines, export/import regulations and goals of other company programs that we are aware of.
Can a gas spring made to customer specifications be returned?
Bansbach gas springs are manufactured to order – from mostly stock components. Cancellation, exchange or return is therefore not possible.
In case of free delivery, we will gladly take over the disposal – without charge – for you.
Can gas springs be disposed of in household waste?
No, gas springs are mainly made of metal. Please observe our disposal instructions.
Can gas springs be used in the food industry?
With the high-quality stainless steel gas springs in V4A, the high requirements of the food industry are met. Food-grade oil (FDA oil) is optionally available.
Can the speed/damping of the gas spring be influenced?
By selecting the appropriate nozzle bore and oil viscosity, the speed and damping of the gas spring can be adapted to the application.
Do Bansbach gas springs have to be stored with the piston rod pointing downwards?
Bansbach gas springs can be stored in any position.
Does a gas spring need to be protected from dirt?
The piston rod must be protected against impact, scratches and contamination – especially paint application. Damage to the surface will destroy the sealing system. If necessary, a wiper or a protective tube should be provided.
Does a gas spring need to be serviced?
No, Bansbach gas springs are maintenance-free. The piston rod must not be greased or oiled.
How do I find my personal contact person?
Bansbach easylift GmbH
Bararossastrasse 8
D-73547 Lorch
Phone: +49 (0) 7172/9107-0
Fax: +49 (0) 7172/9107-44
E-Mail: info@bansbach.de
You can find a contact person on site
Contact form
How high can the internal pressure of a gas spring be?
Depending on the series and the desired extension force, this can be up to approx. 300 bar.
How much is the weight of a gas spring?
Due to the wide range of products, the weights vary greatly.
Diameter piston rod / cylinder:
Ø3/8; Ø4/12; Ø6/15; Ø6/19; Ø6/22; Ø8/19; Ø8/22
Weight
100 g – 500 g
———-
Diameter piston rod / cylinder:
Ø8/28; Ø10/22; Ø10/28; Ø12/28; Ø14/28
Weight
200 g – 1000 g
———-
Diameter piston rod / cylinder:
Ø16/28; Ø10/40; Ø12/40; Ø14/40; Ø20/40; Ø30/70
Weight
500 g – 8000 g
In which colors are Bansbach gas springs available?
The piston rod and the cylinder are supplied in black (standard).
On request, our cylinders are available in all RAL colors. Exception: stainless steel
In which temperature ranges can Bansbach gas springs be used?
For ambient temperatures from -30°C to +80°C.
For other temperature ranges (down to -55°C or up to +200°C) special seal sets are available.
Is it possible to repair a gas spring?
No, because it is a closed system that is under high pressure and must not be opened.
Is the extension force of the gas spring temperature-dependent?
For physical reasons, the extension force of the gas spring changes by approx. 3.3% per 10°C (base + 20°C).
What does the index number (e.g. – -001/100 N) at the end of the article designation of the gas spring mean?
This is a code assigned internally by Bansbach for unambiguous reproducibility of the gas spring.
What materials are Bansbach gas springs made of?
Gas springs consist of piston rod, cylinder tube, connecting parts, turned parts, seals, oil, grease and nitrogen. Piston rods and cylinder tubes are made of steel and are CeramPro® or powder coated in our company. Connecting parts and turned parts are made of lead-free steel or lead-free aluminum.
Seals, oils, greases do not contain substances that are on the list of critical or hazardous substances. Nitrogen is an inert gas that neither burns nor poses any other health hazards. Bansbach gas springs therefore comply with current and, as far as we know, planned laws and regulations.
They comply for example with the RoHS Directive, WEEE Directive, Directives 2003/11/EC, 2002/95/EC, 2002/96/EC. They are not covered by Directives 94/9/EC, 97/23/EC, and 98/37/EC, nor by UN 3164, TRGS 220, and UL 60601-1.
Verification that Bansbach gas springs in the end product comply with national or international laws and regulations remains the responsibility of our customers or the user.
What service life/running performance can I expect from a Bansbach gas spring?
On average, Bansbach gas springs are designed for 50,000 – 100,000 double strokes.
Depending on the design, installation and effective stroke, several 100,000 strokes can also be achieved.
For other products please contact us.
Which stroke lengths are possible for the gas springs?
Depending on the series and design of the gas spring, the stroke length can be freely selected between 10 mm and 1000 mm. Other variations possible, please contact us.
With our “Technical Support” you have a direct line to our technicians, who will competently assist you. If you have questions about offers, availability or prices, our commercial support will be happy to assist you.