#THISISBANSBACH
The right speed for your application!
By using a groove inside the cylinder, the damping characteristics of this gas spring specification can be adapted individually to the customers requirements.
Unlike conventional gas springs, damping is not achieved via the nozzle/oil, but is controlled by the groove in the cylinder. This offers many advantages: Damping is effective in any position, it doesn´t matter if the installation of the gas spring is in horizontal position or with the pistion rod showing upwards- the damping characteristic is always the same.
The damping intensity and characteristic can be adjusted more precisely according to the customers requirements. A very smooth passing into damping is possible and protects the construction additionally.
The dynamic groove is available for cylinder diameters 15, 19 and 22. The groove is designed so that the damping characteristics meet the customer’s individual requirements.
The dynamic groove is used in a wide range of industries. The main sectors include the furniture, special vehicle, mechanical engineering and medical industries, as well as numerous other sectors.
optimum damping thanks to our dynamic groove inside the cylinder
End damping is guranteed in any position
(horizontally or with the piston rod showing upwards)
Controlled damping is possible in any position
Individual damping characteristic is possible for the complete stroke
- Main catalogue p.48
- Main catalogue p.48
- G
- Damping pull out
- 4= normal, normal end damping
- 5= normal, increased end damping
- 7= slow, normal end damping
- 8= slow, increased end damping
- 9= other variations
- Damping push in
- E= normal, normal end damping
- F= normal, increased end damping
- H= slow, normal end damping
- I= slow, increased end damping
- J= other variations
- Damping both directions
- O= normal, normal end damping
- P= normal, increased end damping
- R= slow, normal end damping
- S= slow, increased end damping
- T= other variations
- 6= 6/15
- C= 6/19
- D= 6/22
- 0= 8/19
- 1= 8/22
- 2= 10/22
- 6= 6/15
- C= 6/19
- D= 6/22
- 0= 8/19
- 1= 8/22
- 2= 10/22
- 40-150
- 40-150
- 40-150
- 60-300
- 60-300
- 60-600
- 80-150
- 80-150
- 80-150
- 120-300
- 120-300
- 120-600
- 2x Stroke + 30
- 2x Stroke + 42
- 2x Stroke + 43
- 2x Stroke + 48
- 2x Stroke + 48
- 2x Stroke + 47
- see below
- 30-400
- 30-400
- 30-400
- 30-700
- 30-700
- 50-1300
- 30-400
- 30-400
- 30-400
- 30-700
- 30-700
- 50-1300
*The index number – only required for your repeat order – allows us to exactly reproduce products once they have been manufactured. You will receive the index code with the order confirmation/invoice.
