Main-Type KX

Main-Type KX

Here, the advantages of the K- and P-type of lockable gas springs are combined in one spring. The lokking force in both directions is rigid up to the mechanical strength of the spring. Therefore, KXmodels are also available without pressure but have rigid locking Characteristics.

Description
Details
Connecting parts
Release systems
Brackets
Downloads
Recommendation for installation
Stainless steel
Description

Gas spring adjustment element, rigid locking in push and pull direction

Here the advantages of the K and the P type lockable springs are combined into the one spring. The locking force in both directions is rigid up the mechanical strength of the spring and because the gas chamber is located separately, an extension force isn’t absolutely necessary. KX type lockable gas springs can therefore be manufactured without force and still be rigid in both directions.

What is possible:
Force:
0-2600 N
Locking force in push direction:
7.000 N – 12.000 N
Stroke:
20-250 mm
Diameter 
cylinder/piston rod:
10/22 – 14/40
Push-out speed:
normal, fast, slow
Connecting parts:
The piston rod is available with thread MF10x1x18 or with MF14x1,5×20. You can find the suitable cylinder connecting parts for your lockable gas springs 
Details

Possible article no.:

K0 B1 KX – 3 200 699 001* 550N
Connecting parts
piston rod
 
K0
  • K0 = MF10x1x18
  • O0 = MF14x1,5×20
Connecting parts
cylinder
 
B1
  • see connecting parts
Model
 
KX
  • KX
Push-out speed / damping
 
–
  • – = normal 0 
  • = fast
  • 7 
  • = slow
  • N = stainless steel
  • For quotations / order confirmations, the extension speed is not shown in the article no. due to computer reasons.
Diameter piston rod / cylinder
Øx/Øy mm
3
  • 2= 10/22
  • 3= 10/28
  • B= 14/40
Stroke
mm
200
  • 20-250
  • 20-250
  • 30-250
Extended length 
EL2** mm
699
  • Stroke x 3 +83
  • Stroke x 3 +87
  • Stroke x 3 +111
Index Number
 
001*
  • * see below
Force
F (N)
550N
  • no pressure or 50 – 1300
  • no pressure or 50 – 1300
  • no pressure or 150 – 2600
Locking force in pull direction
(release travel < 1mm)
 
  • N/A
  • N/A
  • N/A
Locking force in pull direction
(relese travel > 2,5mm)
 
  • 7.000
  • 10.000
  • 12.000
Locking force in push direction
 
 
  • 7.000
  • 10.000
  • 12.000
*Index Number

With the index no. – only necessary for repeating orders – we can reproduce exactly the same gas spring which has already been produced. You will receive the index no. with the order confirmation / invoice.

** Attention: Calculation of extended length

EL1
The total length is calculated when the piston rod is extended. Please add the length of the connecting parts in order to find out the total length.

EL2
length EL2 = measured without hinge eyes and threads.

Connecting parts

Bansbach Connecting parts

Choose your connecting part.
ALL CONNECTING PARTS
Code
A1
A1
B1
C1
D2
E1
F2
F2
G2
H2
J2
K2
K3
L2
M2
M2
M3
N2
N3
O2
P2
V2
Z1
Z2
SW
10,0
10,0
12,0
14,0
5,0
3,0
10,0
10,0
8,0
10,0
8,20
12,0
12,0
12,0
10,0
10,0
8,0
10,0
8,0
10,0
5,0
6,0
10,0
12,0
Ø
8,2
8,2
8,2
14,2
6,2
8,2
8,2
8,2
6,2
6,2
8,2
8,2
9,2
10,2
10,2
10,2
10,2
8,2
8,2
10,5
8,2
8,2
8,5
12,2
L2
16,0
16,0
13,0
40,0
16,0
12,0
9,5
12,0
16,0
16,0
16,0
16,0
16,0
13,0
16,0
16,0
16,0
13,0
16,0
16,0
12,0
13,0
16,0
12,0
L4
15,0
15,0
12,0
20,0
15,0
10,5
9,5
11,0
15,0
15,0
15,0
15,0
15,0
12,0
15,0
15,0
15,0
12,0
15,0
15,0
11,0
12,0
15,0
12,0
Ø1
15,0-17,0
20,0
20,0
20,0
15,0-17,0
11,0
15,0
17,0
15,0-17,0
15,0-17,0
15,0-17,0
17,0
20,0
20,0
15,0-17,0
20,0
16,0
20,0
20,0
20,0
17,0
20,0
20,0
20,0
d2
19,0-22,0
28,0
28,0
20,0
19,0-22,0
15,0
19,0
22,0
19,0-22,0
19,0-22,0
19,0-22,0
22,0
28,0
28,0
19,0-22,0
28,0
28,0
28,0
28,0
28,0
22,0
28,0
28,0
28,0
Material
Aluminium
Aluminium
Aluminium
Aluminium
Aluminium
Steel
Aluminium
Aluminium
Aluminium
Aluminium
Aluminium
Aluminium
Aluminium
Aluminium
Aluminium
Aluminium
Aluminium
Aluminium
Aluminium
Aluminium
Aluminium
Aluminium
Aluminium
Release systems

Bansbach release systems

Choose an release system.
ALL RELEASE SYSTEMS
Release System With Lever
Bowden Wire Release System
Hydraulic Release System
Release lever in “function”
  • 1Gas spring release head standard
  • 2Pivot point
  • 1aRelease lever (release direction towards spring)
  • 2aRelease lever (release direction towards the spring)
  • 1bRelease lever (release direction away from spring)
  • 2bRelease lever (release direction away from spring)
Flat grip for release lever
Standard release head for bowden wire
type of
construction
  • 20AK08M8*1
  • 20AKXXMXX
  • 20AK10M10*1
  • 20AK12M10*1
  • 20AK12M14*1,5
  • 20AK14M14*1,5
max. load
inpull direction
  • 7.000
  • 7.000
  • 12.000
  • 12.000
  • 12.000
  • 12.000
A mm
  • 37
  • 37
  • 54
  • 54
  • 54
  • 54
B mm
  • 30
  • 30
  • 39
  • 39
  • 39
  • 39
C mm
  • 38
  • 40
  • 50
  • 50
  • 50
  • 50
D mm
  • R8,5
  • R8,5
  • R14
  • R14
  • R14
  • R14
D1 Ø mm
  • 8,1-0,05
  • 10,1-0,05
  • 10,1-0,05
  • 12,1-0,05
  • 12,1-0,05
  • 14,1-0,05
E Ø mm
  • 17
  • 17
  • 21
  • 21
  • 21
  • 21
F mm
  • SW11
  • SW11
  • SW14
  • SW14
  • SW14
  • SW14
G mm
  • 20
  • 20
  • 26
  • 26
  • 26
  • 26
H mm
  • 38.5
  • 38.5
  • 53
  • 53
  • 53
  • 53
M1 mm
  • M8*1
  • M10*1
  • M10*1
  • M10*1
  • M14*1.5
  • M14*1.5
Nut (SW)
  • SW13
  • SW17
  • SW17
  • SW17
  • SW19
  • SW19
At screwed depth mm
  • 9
  • 7
  • 8
  • 8
  • 8
  • 8