Main-Type P
Main-Type P
The function is similar to that of a Ktype but the oil and gas chamber is on the opposite side. This means that the spring is rigid up to the mechanical strength of the spring in compressed
direction. In extended direction, the lokking is rigid until the the force of the pressure on the floating piston is exceeded (locking force). If this occurs, the piston rod inserts a little bit which may look like a overload safety device.
Rigid locking in compression, relatively rigid in extension
The function is similar to that of a K type, but with the oil and gas chamber on the opposite side. This means that the spring is rigid up to the mechanical strength of the spring in the compression direction. In the extension direction, the locking is rigid until the force of the pressure on the floating piston is exceeded (locking force).
cylinder/piston rod:
Possible article no.:
piston rod
- K0 = MF10x1x18
- O0 = MF14x1,5×20
- W0 = MF 8x1x16
cylinder
- see connecting parts
- P
- – = normal 0
- = fast
- 7
- = slow
- K
- =Short release
- < 1 mm
- instead of
- < 3,5 mm
- B = special
- N = stainless steel (F1 max 300N)
- 1= 8/22
- E= 8/28
- 2= 10/22
- 3= 10/28
- A= 10/40
- B= 14/40
- 30-200
- 30-200
- 30-200
- 30-200
- 30-200
- 30-200
- Stroke x 2,83 +78
- Stroke x 2,64 +78
- Stroke x 2,43 +78
- Stroke x 2,48 +82
- Stroke x 2,35 +82
- Stroke x 2,25 +82
- Stroke x 3,46 +85
- Stroke x 3,15 +85
- Stroke x 2,76 +85
- Stroke x 2,81 +89
- Stroke x 2,63 +89
- Stroke x 2,42 +89
- Stroke x 2,32 +100
- Stroke x 2,25 +100
- Stroke x 2,17 +100
- Stroke x 2,68 +102
- Stroke x 2,53 +102
- Stroke x 2,17 +102
gres-
sion
ca.
- 35
- 50
- 100
- 35
- 50
- 100
- 35
- 50
- 100
- 35
- 50
- 100
- 35
- 50
- 100
- 35
- 50
- 100
- * see below
- 40-700
- 40-700
- 50-1300
- 50-1300
- 100-1300
- 250-2600
- Reduced locking force
- Reduced locking force
- Reduced locking force
- Reduced locking force
- Reduced locking force
- Reduced locking force
- Reduced locking force
- Reduced locking force
- 2,6 x F1
- 4,8 x F1
- 12 x F1
- 5,6 x F1
- 7000
- 7000
- 7000
- 10.000
- 10.000
- 10.000
With the index no. – only necessary for repeating orders – we can reproduce exactly the same gas spring which has already been produced. You will receive the index no. with the order confirmation / invoice.
EL1
The total length is calculated when the piston rod is extended. Please add the length of the connecting parts in order to find out the total length.
EL2
length EL2 = measured without hinge eyes and threads.
Bansbach connecting parts
Bansbach release systems
Release System With Lever
Bowden Wire Release System
Hydraulic Release System
Release lever in “function”
- 1Gas spring release head standard
- 2Pivot point
- 1aRelease lever (release direction towards spring)
- 2aRelease lever (release direction towards the spring)
- 1bRelease lever (release direction away from spring)
- 2bRelease lever (release direction away from spring)
Flat grip for release lever
construction
- 20AK08M8*1
- 20AKXXMXX
- 20AK10M10*1
- 20AK12M10*1
- 20AK12M14*1,5
- 20AK14M14*1,5
inpull direction
- 7.000
- 7.000
- 12.000
- 12.000
- 12.000
- 12.000
- 37
- 37
- 54
- 54
- 54
- 54
- 30
- 30
- 39
- 39
- 39
- 39
- 38
- 40
- 50
- 50
- 50
- 50
- R8,5
- R8,5
- R14
- R14
- R14
- R14
- 8,1-0,05
- 10,1-0,05
- 10,1-0,05
- 12,1-0,05
- 12,1-0,05
- 14,1-0,05
- 17
- 17
- 21
- 21
- 21
- 21
- SW11
- SW11
- SW14
- SW14
- SW14
- SW14
- 20
- 20
- 26
- 26
- 26
- 26
- 38.5
- 38.5
- 53
- 53
- 53
- 53
- M8*1
- M10*1
- M10*1
- M10*1
- M14*1.5
- M14*1.5
- SW13
- SW17
- SW17
- SW17
- SW19
- SW19
- 9
- 7
- 8
- 8
- 8
- 8
